Patel, Himanshu C.
Proceedings of International Conference on Advances in Tribology and Engineering Systems
Part I. Fluid Film Lubrication
1. Experimental Thermal Analysis of Bronze Elliptical and Offset-Halves Journal Bearing Profiles
Rakesh Sehgal
2. Effect of Bearing Deformation on the Performance of a Magnetic Fluid Based Infinitely Rough Short Porous Journal Bearing
M. E. Shimpi, G. M. Deheri
3. Effects of Velocity-Slip and Viscosity Variation in Squeeze Film Lubrication of Spherical Bearings
R. Raghavendra Rao, K. Gouthami, J. Vijaya Kumar
4. Magnetic Fluid-Based Squeeze Film Between Rotating Curved Rough Circular Plates
Nikhilkumar D. Abhangi, G. M. Deheri, Shruti S. Mehta
5. Performance of a Magnetic Fluid Based Squeeze Film Between Infinitely Long Rough Porous Rectangular Plates
R. M. Patel, G. M. Deheri, P. A. Vadher
6. Power Law Fluid Film Lubrication of Journal Bearing with Squeezing and Temperature Effects
Dhaneshwar Prasad, S. S. Panda, S. V. Subrahmanyam
7. Rough Porous Circular Convex Pad Slider Bearing Lubricated with a Magnetic Fluid
S. D. Shukla, G. M. Deheri
8. Slip Velocity and Roughness Effect on Magnetic Fluid Based Infinitely Long Bearings
Jimit R. Patel, Gunamani Deheri
9. Squeeze Film Performance in Parallel Rough Circular Disks Lubricated by Ferrofluid with Non-newtonian Couple Stress Effect
H. A. Patel, M. P. Patel, H. C. Patel, G. M. Deheri
10. The Performance Analysis of a Magnetic Fluid-Based Hydrodynamic Long Journal Bearing
N. S. Patel, D. P. Vakharia, G. M. Deheri, H. C. Patel
11. Thermo Hydrodynamic Lubrication Characteristics of Power Law Fluids in Rolling/Sliding Line Contact
Dhaneshwar Prasad, S. V. Subrahmanyam
12. Transient Analysis of Plain Circular Bearing with Micropolar Fluid
Rajiv Verma, Puneet Mathur
Part II. Friction and Wear
13. Effect of Cryogenic Treatment on Hardness, Microstructure and Wear Behavior of Hot Die Steel Grade AISI-H13
Sanjeev Katoch, Rakesh Sehgal, Vishal Singh
14. Experimental Study to Measure Piston Ring Assembly Friction of Multicylinder I.C. Engine (S.I.) on Motorized Engine Test Rig: A Case Study
Atul S. Shah, D. V. Bhatt
15. Influence of Surfactant in Hexaferrites as Wear Resistance
N. R. Panchal, R. B. Jotania
16. Investigations of Friction and Wear in Pultruded Glass Fibre Epoxy Composites
Piyush P. Gohil, Hiral H. Parikh, Vimal B. Patel
17. Morphology and Friction Characterization of CVD Grown Graphene on Polycrystalline Nickel
M. Tripathi, G. Paolicelli, S. Valeri
18. Optimization of Reciprocating Friction and Wear Test Rig Operating Parameters for Segmented Piston Ring: Liner Assembly
B. M. Sutaria, D. V. Bhatt
19. Strengthening Fiber-Matrix Adhesion to Improve Tribo-Performance of Composites
Nidhi Dureja, Ajay Kumar Kadiyala, Jayashree Bijwe
Part III. Lubricant
20. Ferrofluid Lubrication of Squeeze Film in Curved Circular Plates with Assorted Porous Structures
N. D. Patel, G. M. Deheri, S. S. Mehta
21. Lubrication for Microsystems
Sujeet K. Sinha
22. Study on the Effect of Blend Oil with Based Oil Analysis
B. M. Sutaria, M. K. Bhatt, B. K. Sonigra, D. V. Bhatt
23. Tribological Testing of Electrolyzed 17-4 PH Steel Against SS 440C Under Water Lubricated Condition
Neelima Khare, P. K. Limaye, N. L. Soni, R. J. Patel
Part IV. Machine Components and Bearing Design
24. Design and Development of Rotary Fixture for CNC with Tribology Considerations of Mechanics Analysis and Dynamic Balancing as Pre-mortem Tool
Nirav P. Maniar, D. P. Vakharia
25. Design and Kinematic Analysis of an Automatic Tool Changing Mechanism Used in VMC
M. B. Vaghela, V. J. Savsani, S. B. Jadeja
26. Effect of Elliptical Shaft Geometry on Non-dimensional Pressure and Load in Hydrodynamic Journal Bearings
P. C. Chhotani, D. P. Vakharia
27. Effect of Localized Defect on the Vibration Behavior of Cylindrical Roller Bearing-Rotor System
U. A. Patel, S. H. Upadhyay
28. Experimental Investigation on Life Cycle Analysis of the Moly (Mo) Coated Piston Ring in C. I. Engine
P. D. Patel, R. N. Patel, H. C. Patel, Pradip M. Patel
29. Load Capacity Analysis of Gas Foil Bearing (GFB) for Different Foil Materials
T. M. Jamir, S. K. Kakoty
30. Nonlinear Dynamic Behavior of Balanced Rotor Bearing System Due to Various Localized Defects
D. H. Pandya, S. H. Upadhyay, S. P. Harsha
31. Performance of a Magnetic Fluid Based Longitudinally Rough Short Bearing
P. I. Andharia, G. M. Deheri, Shruti Mehta
32. Prediction of Useful Life of Rolling Contact Bearings Using Monte Carlo Simulation Technique
Eshan Singh, G. D. Thakre, P. K. Arya, B. M. Shukla
33. Side Edge Effect on Elastic Contact Stress and Deformation
W. Wang, P. L. Wong, Z. M. Zhang
34. Smart Journal Bearing Using Giant Magnetostrictive Actuators
Z. M. Fang, Z. Li, W. Wang
Part V. Nano Technology/Tribology
35. Experimental Evaluation of the Tribological Properties of CuO Nano-Lubricants at Elevated Temperatures
Chacko Preno Koshy, P. K. Rajendrakumar, Manu V. Thottackkad
36. On Using Nanoporous Alumina Films as Tribological Coating
Arti Yadav, Prashant Pendyala, M. S. Bobji
37. Solid Particle Erosion of
Niharika Mohanta, S. K. Acharya
38. Synthesis and Micro-Structural Characterization of CrAlN Coatings by Reactive Magnetron Sputtering
Hetal N. Shah, R. Jayaganthan
39. Tribology Characteristics of Cold Rolled Spray Cast Al–6Si–20Pb Alloy
R. Mittal, D. Singh
Part VI. Skeleton and Structural Systems
40. An Innovative Approximate Method for Analysis of Continuous Beam
D. J. Varia, H. S. Patel
41. Seismic Response of RC Elevated Water Tank Considering Site Specific Acceleration Time History
Chirag N. Patel, H. S. Patel
42. Soil-Foundation-Structure Interaction Effects in Seismic Behaviour of RC Elevated Water Tank
Chirag N. Patel, H. S. Patel
Part VII. Engineering System
43. Nonlinear Dynamic Analysis of High Speed Unbalanced Rotor Supported on Deep Groove Ball Bearings Considering the Preload Effect
H. K. Yadav, S. H. Upadhyay, S. P. Harsha
Part VIII. Bio-Tribology, Green Tribology and Biomimetics
44. Temperature Distribution in Living Tissue with Fractional Bioheat Model in Thermal Therapy
R. S. Damor, Sushil Kumar, A. K. Shukla
Nyckelord: Materials Science, Tribology, Corrosion and Coatings, Mechanical Engineering, Mechanics, Industrial and Production Engineering, Appl.Mathematics/Computational Methods of Engineering
- Författare
- Patel, Himanshu C.
- Deheri, Gunamani
- Patel, Harshvadan S.
- Mehta, Shreya M.
- Utgivare
- Springer
- Utgivningsår
- 2014
- Språk
- en
- Utgåva
- 2014
- Serie
- Lecture Notes in Mechanical Engineering
- Sidantal
- 28 sidor
- Kategori
- Teknologi, energi, trafik
- Format
- E-bok
- eISBN (PDF)
- 9788132216568