Joshi, Vineet
Magnesium Technology 2018
Part I. Magnesium Technology 2018
1. Mg Alloys: Challenges and Achievements in Controlling Performance, and Future Application Perspectives
Hajo Dieringa, Norbert Hort, Dietmar Letzig, Jan Bohlen, Daniel Höche, Carsten Blawert, Mikhail Zheludkevich, Karl Ulrich Kainer
2. Solute/Stacking Fault Energies in Mg and Implications for Ductility
Binglun Yin, Zhaoxuan Wu, W. A. Curtin
3. Recent Developments in Magnesium Alloy Corrosion Research
Nick Birbilis, R. L. Liu, Y. Yan, O. Gharbi
4. Towards Active Corrosion Protection of Mg Alloys Using Corrosion Inhibition Approaches
M. L. Zheludkevich, S. V. Lamaka, Y. Chen, D. Hoeche, C. Blawert, K. U. Kainer
5. Ni-P-MWNTs Composite Coatings on Magnesium Alloys AZ31 Part 1: MWNTs Content in Coating
Dong Guo, Haiwang Wu, Sheng Wang, Yongjuan Dai, Shiqing Sun, Sen Qin, Kai Fu
6. Ni-P-MWNTs Composite Coatings on Magnesium Alloys AZ31 Part 2: Tribological Behavior and MWNTs Content in Coating
Dong Guo, Sheng Wang, Yongjuan Dai, Shiqing Sun, Sen Qin, Kai Fu
7. Adding Dimensions to the Immersion Testing of Magnesium Corrosion
Lars Wadsö, Dmytro Orlov
8. Effect of Fluoride Ion on the Microstructure and Properties of Permanganate Conversion Coating on AZ91D Magnesium Alloy
Shih-An Yang, Chao-Sung Lin
9. Corrosion Characteristics of Two Rare Earth Containing Magnesium Alloys
M. AbdelGawad, B. Mansoor, A. U. Chaudhry
10. Surface and Interfacial Energies of Mg
Fangxi Wang, Bin Li
11. Effect of Ca on the Microstructure and Mechanical Properties in Mg Alloys
E. I. Andritsos, G. C. G. Skinner, A. T. Paxton
12. Investigation of Grain Refinement Method for AZ91 Alloy Using Carbide Inoculation
Jun Ho Bae, Young Min Kim, Ha Sik Kim, Bong Sun You
13. Experimental Study of the Solidification Microstructure in the Mg-Rich Corner of Mg–Al–Ce System
Charlotte Wong, Mark J. Styles, Suming Zhu, Trevor Abbott, Kazuhiro Nogita, Stuart D. McDonald, David H. StJohn, Mark A. Gibson, Mark A. Easton
14. Material Design for Enhancing Toughness of Mg Alloy and Application for Biodegradable Devices
Toshiji Mukai
15. Influences of Yttrium Content on Microstructure and Mechanical Properties of as-cast Mg–Ca–Y–Zr Alloys
Sihang You, Yuanding Huang, Karl Ulrich Kainer, Norbert Hort
16. Strengthening and Toughening Behaviors of the Mg–9Al Alloy Containing Oxygen Atoms
Seung Won Kang, Dong Hyun Bae
17. Investigations on Microstructure and Mechanical Properties of Non-flammable Mg–Al–Zn–Ca–Y Alloys
Stefan Gneiger, Nikolaus Papenberg, Simon Frank, Rudolf Gradinger
18. Development of BioMg
R. Decker, S. LeBeau, D. LaCroix, S. Makiheni, J. Allison
19. The Electrolytic Production of Magnesium from MgO
James C. Withers, John Laughlin, Jeffery Babis
20. Empirical Examination of the Formation of Mechanical Properties of Heated Twin-Roll-Cast Magnesium Strips
Claudia Kawalla, Marie Teuber, Michael Höck
21. The Morphology and Distribution of Al
G. Zeng, X. Zhu, S. Ji, C. M. Gourlay
22. Study on the Production of Metallic Magnesium from Nickel-Containing Serpentine
Huimin Lu, Guangzhi Wu
23. Fabrication of Mg(OH)
Xijuan Pan, Zhihe Dou, Ting-an Zhang, Yukun Ren, Guozhi Lyu, Junjie Zhang, Xiuxiu Han
24. Update on Ballistic Characterization of the Scalability of Magnesium Alloy AMX602
Tyrone L. Jones
25. Experimental Study on the Reversion Reaction Between Magnesium and CO Vapor in the Carbothermic Reduction of Magnesia Under Vacuum
Yang Tian, Bao-qiang Xu, Bin Yang, Da-chun Liu, Tao Qu, Hai Liu, Yong-nian Dai
26. Study on Metal Smelting Process Under Microwave Irradiation
Satoshi Fujii, Eiichi Suzuki, Naomi Inazu, Shuntarou Tsubaki, Masahiko Maeda, Yuji Wada
27. Thermogravimetric Analysis of Simultaneous Decomposition and Formation of MgB
Muhammad A. Imam, Ramana G. Reddy
28. Dislocations in Mg Alloys with Rare-Earth Element Addition
Zhiqing Yang, Hengqiang Ye
29. Microstructure, Mechanical Properties and Deformation Behavior of Mg–Gd–Zn Alloy
K. Li, V. S. Y. Injeti, P. Trivedi, R. D. K. Misra
30. Twin-Slip Interaction at Low Stress Stage Deformation in an AZ31Mg Alloy
Peng Chen, Bin Li, Duke Culbertson, Yanyao Jiang
31. In Situ Neutron Diffraction and Acoustic Emission During the Biaxial Loading of AZ31 Alloy
Jan Čapek, Tobias Panzner, Karl Sofinowski, Daria Drozdenko, Kristián Máthis
32. Acoustic Emission Study of High Temperature Deformation of Mg–Zn–Y Alloys with LPSO Phase
Klaudia Horváth, Daria Drozdenko, Kristián Máthis, Gerardo Garcés, Patrik Dobroň
33. Deformation and Recrystallization Mechanisms and Their Influence on the Microstructure Development of Rare Earth Containing Magnesium Sheets
Changwan Ha, Sangbong Yi, Jan Bohlen, Xiaohua Zhou, Heinz-Günter Brokmeier, Norbert Schell, Dietmar Letzig, Karl Ulrich Kainer
34. Thermo-Mechanical Treatment of Extruded Mg–1Zn Alloy: Cluster Analysis of AE Signals
Patrik Dobroň, Daria Drozdenko, Marius Hegedűs, Juraj Olejňák, Klaudia Horváth, Jan Bohlen
35. The Effect of Initial Texture on Deformation Behaviors of Mg Alloys Under Erichsen Test
Jaiveer Singh, Min-Seong Kim, Shi-Hoon Choi
36. Measurement of Twin Formation Energy Barriers Using Nudged Elastic Band Molecular Statics
Deepesh Giri, Christopher Barrett, Haitham El Kadiri
37. Microstructure and Mechanical Properties of Mg-7.71Gd-2.39Nd-0.17Zr Alloy After the Different Heat Treatments
Shifeng Luo, Guangyu Yang, Lei Xiao, Wanqi Jie
38. Superplasticity in a Chip-Consolidated Mg
Kazuha Suzawa, Shin-ichi Inoue, Michiaki Yamasaki, Yoshihito Kawamura, Michimasa Miyanaga, Katsuhito Yoshida, Nozomu Kawabe
39. Technological Solutions to Apply Magnesium Bulk Materials in Dynamic Bending and Axial Compression Load Cases
Elmar Beeh, Horst E. Friedrich, Philipp Straßburger, William Altenhof, Ping Zhou, Michael Worswick, Samuel Kim
40. Mechanical Properties of Thermo-Mechanically Treated Extruded Mg–Zn-Based Alloys
Daria Drozdenko, Patrik Dobroň, Juraj Olejňák, Marius Hegedüs, Klaudia Horváth, Jan Bohlen
41. Influence of Low Temperature Forging on Microstructure and Low Cycle Fatigue Behavior of Cast AZ31B Mg Alloy
D. Toscano, S. K. Shaha, B. Behravesh, H. Jahed, B. Williams, X. Su
42. The Recrystallization and Grain Growth Behavior of Magnesium
Aeriel D. Murphy, John E. Allison
43. Strengthening of a Biodegradable Mg–Zn–Ca Alloy ZX50 After Processing by HPT and Heat Treatment
A. Ojdanic, E. Schafler, J. Horky, D. Orlov, M. Zehetbauer
44. Strain Heterogeneity Structures in Wrought Magnesium AZ31 Under Reversed Loading
C. Can Aydıner
45. Hot Forging Behavior of Mg−8Al−4Ba−4Ca (ABaX844) Alloy and Validation of Processing Map
K. P. Rao, C. Dharmendra, Y. V. R. K. Prasad, H. Dieringa, N. Hort
46. Effect of Ca on Oxidation Resistance of Magnesium Alloys (AZ91)
Shima Paridari, Hassan Saghafian Larijani, Ghasem Eisaabadi. B
47. Evolution of Microstructure and Mechanical Properties During Casting and Rolling of the ZEK100 Sheet
A. Javaid, F. Czerwinski
Part II. Magnesium Alloy Development: An LMD Symposium in Honor of Karl Kainer
48. Recent Developments in the Application of the Interdependence Model of Grain Formation and Refinement
D. H. StJohn, X. Hu, M. Sun, L. Peng, H. Dieringa
49. Thermodynamics of Phase Formation in Mg–Al–C Alloys Applied to Grain Refinement
G. Deffrennes, B. Gardiola, M. Lomello, J. Andrieux, O. Dezellus, R. Schmid-Fetzer
50. Development of Magnesium-Rare Earth Die-Casting Alloys
Mark Easton, Mark A. Gibson, Suming Zhu, Trevor Abbott, Jian-Feng Nie, Colleen J. Bettles, Gary Savage
51. Creep Resistant Mg–Mn Based Alloys for Automotive Powertrain Applications
Mert Celikin, Mihriban Pekguleryuz
52. Solutions for Next Generation Automotive Lightweight Concepts Based on Material Selection and Functional Integration
Horst E. Friedrich, Elmar Beeh, Carmen S. Roider
53. Magnesium Pistons in Engines: Fiction or Fact?
N. Hort, H. Dieringa, Karl Ulrich Kainer
54. Development of Magnesium Sheets
Dietmar Letzig, Jan Bohlen, Gerrit Kurz, Jose Victoria-Hernandez, Roland Hoppe, Sangbong Yi
55. Development of Heat-Treatable High-Strength Mg–Zn–Ca–Zr Sheet Alloy with Excellent Room Temperature Formability
M. Z. Bian, T. T. Sasaki, B. C. Suh, T. Nakata, S. Kamado, K. Hono
56. Interaction Between Propagating Twins and Non-shearable Precipitates in Magnesium Alloys
Matthew R. Barnett, Huan Wang
57. Effects of Severe Plastic Deformation on Mechanical Properties and Corrosion Behavior of Magnesium Alloys
Ahmad Bahmani, Kwang Seon Shin
58. Alloy Design for the Development of Heat Treatable High Strength Mg Sheet Alloy with Excellent Room Temperature Formability
B.-C. Suh, M.-Z. Bian, T. Nakata, T. T. Sasaki, S. Kamado, K. Hono
59. Co-precipitation on the Basal and Prismatic Planes in Mg–Gd–Ag–Zr Alloy Subjected to Over-Ageing
Jiehua Li, Fredrik S. Hage, Ali Gholinia, Pan Xie, Yu Zhang, Yujuan Wu, Liming Peng, Sarah J. Haigh, Quentin M. Ramasse, Peter Schumacher
60. Evolution of the Dislocation Structure During Compression in a Mg–Zn–Y Alloy with Long Period Stacking Ordered Structure
Kristian Máthis, Moustafa El-Tahawy, Gerardo Garcés, Jenő Gubicza
61. Intermetallic Phase Characteristics in the Mg–Nd–Zn System
Domonkos Tolnai, Samuel A. Hill, Serge Gavras, Tungky Subroto, Ricardo Buzolin, Norbert Hort
62. Biodegradable Mg–Y and Mg–Li Alloys with the Addition of Ca and Zn for Medical Applications
Sonia Boczkal, Michał Karaś, Anna Maria Osyczka, Marzena Lech-Grega
63. Degradable Magnesium Implants—Assessment of the Current Situation
R. Willumeit-Römer, N. Ahmad Agha, B. Luthringer
64. Study on Mg–Si–Sr Ternary Alloys for Biomedical Applications
Omer Biest, Andrea Gil-Santos, Norbert Hort, Rainer Schmid-Fetzer, Nele Moelans
65. Solidification Analysis of Grain Refined AZ91D Magnesium Alloy via Neutron Diffraction
T. Davis, L. Bichler, D. Sediako, L. Balogh
66. Microstructure Evolution and Mechanical Properties of Thin Strip Twin Roll Cast (TRC) Mg Sheet
X. Yang, C. L. Mendis, J. B. Patel, Z. Fan
Part III. Environmental Challenges and Opportunities for the Magnesium Industry: Recycling and Sustainability Joint Session
67. Repaired Algorithm for Nonlinear to Predict the Displacement of Copper Ion in the Absorption System of Treated Steal Slag
Shujing Zhu, Ying Qin
Nyckelord: Materials Science, Metallic Materials, Characterization and Evaluation of Materials, Materials Engineering
- Utgivare
- Joshi, Vineet
- Neelameggham, Neale R.
- Orlov, Dmytro
- Solanki, Kiran N.
- Utgivare
- Springer
- Utgivningsår
- 2018
- Språk
- en
- Utgåva
- 1
- Serie
- The Minerals, Metals & Materials Series
- Sidantal
- 21 sidor
- Kategori
- Teknologi, energi, trafik
- Format
- E-bok
- eISBN (PDF)
- 9783319723327
- Tryckt ISBN
- 978-3-319-72331-0