Mitsuishi, Mamoru
Manufacturing Systems and Technologies for the New Frontier
1. Driving Innovations, an industry case to enhance manufacturing competitiveness
Hironori Yamamoto
2. Architecture-based Comparative Advantage in Japan and Asia
Takahiro Fujimoto
3. Manufuture and Sustainable Manufacturing
Engelbert Westkämper
4. Challenges for the Manufacturing Enterprise to Achieve Sustainable Development
J. W. Sutherland, J. L. Rivera, K. L. Brown, M. Law, M. J. Hutchins, T. L. Jenkins, K. R. Haapala
5. Complex Adaptive Systems (CAS) Approach to Production Systems and Organisations
László Monostori, Balázs Csanád Csáji
6. Scientific Approach to Services: What is the Design of Services?
Tamio Arai, Tatsunori Hara, Yoshiki Shimomura
7. A General Economic Model for Manufacturing Cost Simulation
Mathias Jönsson, Carin Andersson, Jan-Eric Ståhl
8. Implementation of an Economic Model to Simulate Manufacturing Costs
Mathias Jönsson, Carin Andersson, Jan-Eric Ståhl
9. A Dynamic Cost Model for the Effect of Improved Process Flexibility in Steel Plants
Joakim Storck, Bengt Lindberg
10. Manufacturing Characteristics of Subcontractor SMME:s — an Empirical Study
Malin Löfving, Christer Johansson, Mats Winroth
11. Integrated Information as an Enabler for Change Impact Evaluation in Manufacturing Life-cycle Management
Victoria Rogstrand, Johan Nielsen, Torsten Kjellberg
12. Total Performance Analysis of a Downsized Manufacturing System
Nozomu Mishima, Shinsuke Kondou, Keijiro Masui
13. Environmental Burden Analysis for Machining Operation Using LCA Method
Hirohisa Narita, Nelfa Desmira, Hideo Fujimoto
14. Efficient Maintenance of Machine Tools — Adapted Maintenance Activities and Assembly-Specific Maintenance Intervals
Jürgen Fleischer, Jan Wieser, Matthias Schopp, Alexander Broos
15. Strategy-oriented Qualification Framework as a Supporting Function of Lean Production System Implementation in Small and Medium-sized Enterprises
Uwe Dombrowski, Isabel Crespo
16. An environmental perspective on Lean Production
Christoph Herrmann, Sebastian Thiede, Julian Stehr, Lars Bergmann
17. Quantified Interdependencies between Lean Methods and Production Figures in the Small Series Production
Jürgen Fleischer, Gisela Lanza, Kathrin Peter
18. Further Potentials of Smart Logistics
Günther Schuh, Sebastian Gottschalk, Tim Höhne, Philipp Attig
19. Production Management in SME Networks - Evaluation of Potentials and Achievements
Christoph Herrmann, Lars Bergmann, Philipp Halubek
20. Digital Virtual Holons — An Approach to Digital Manufacturing Systems
Hasse Nylund, Kai Salminen, Paul Andersson
21. Complex Manufacturing Space: An Integrated Description Model of Real and Virtual System Concepts for Information Enhanced Manufacturing
Masahiko Onosato, Fumiki Tanaka, Hiroaki Date, Ryoji Kawagishi
22. Grid Engineering for Networked and Multi-scale Manufacturing
Carmen Constantinescu, Engelbert Westkämper
23. Smart Factory - A Step towards the Next Generation of Manufacturing
Dominik Lucke, Carmen Constantinescu, Engelbert Westkämper
24. Sustainable Manufacturing - Challenges and Possibilities for Research and Industry from a Swedish perspective
Magnus Wiktorsson, Monica Bellgran, Mats Jackson
25. Characteristic of a Proactive Assembly System
Kerstin Dencker, Johan Stahre, Åsa Fasth, Peter Gröndahl, Lena Mårtensson, Thomas Lundholm
26. Virtual Manufacturing Work Systems
Peter Butala, Ivan Vengust, Rok Vrabi?, Lovro Kuš?er
27. Virtual Enterprise Model for Integrated Planning in Manufacturing Supply Network
Jayeola Femi Opadiji, Toshiya Kaihara
28. Manufacturing system to support design concept and reuse of manufacturing experience
Andersson Petter, Isaksson Ola
29. Globalization-Compatible Product Structure Based on Technological Core Competences
Patrick Grosshennig, Volker Grosse-Heitmeyer
30. Reducing design complexity of multidisciplinary domain integrated products: a case study
Juan M. Jauregui-Becker, Wessel W. Wits, Fred J. A. M. Houten
31. PLIB Ontology for Great Group Technology
Qing-sheng Xie, Gui-xian Zhou, Shao-bo Li
32. Geometrical Properties of Paper Spring
Cheong Chew Min, Hiromasa Suzuki
33. Application of Axiomatic Design to Develop a Lean Logistics Design Methodology
Cleber Favaro
34. Measuring and analysing Levels of Automation in an assembly system
Åsa Fasth, Johan Stahre, Kerstin Dencker
35. Sustainable Design of Machine Tools through Load-Dependent Interventions and Adapted Services
Jürgen Fleischer, Matthias Schopp, Alexander Broos, Jan Wieser
36. Modeling and implementation of Digital Semantic Machining Models for 5-axis machining application
Fumiki Tanaka, Masahiko Onosato, Takeshi Kishinami, Kiyoshi Akama, Makoto Yamada, Tsukasa Kondo, Satoshi Mistui
37. Compensation of Thermal Deformations at Machine Tools using Adaptronic CRP-Structures
Eckart Uhlmann, Philipp Marcks
38. Image Noise Reduction Using Wide Range Tuned Mass Damper for Scanning Electron Microscope
Mitsuru Hamochi, Makoto Aoshima, Shinji Wakui
39. A Model for Adaptively Generating Assembly Instructions Using State-based Graphs
Michael F. Zaeh, Mathey Wiesbeck
40. Evaluating Assembly Instruction Methods in Cell Production System by Physiological Parameters and Subjective Indices
Nuttapol Pongthanya, Feng Duan, Jeffrey Too Chuan Tan, Kei Watanabe, Ye Zhang, Masao Sugi, Hiroshi Yokoi, Tamio Arai
41. Assembly Work Settings Enabling Proactivity — Information Requirements
Jessica Bruch, Johan Karltun, Kerstin Dencker
42. Assembly Information System for Operational Support in Cell Production
Jeffrey Too Chuan Tan, Feng Duan, Ye Zhang, Kei Watanabe, Nuttapol Pongthanya, Masao Sugi, Hiroshi Yokoi, Tamio Arai
43. Multimedia based Assembly Supporting System for Cell Production
Feng Duan, Masahiro Morioka, Jeffrey Too Chuan Tan, Ye Zhang, Kei Watanabe, Nuttapol Pongthanya, Masao Sugi, Hiroshi Yokoi, Ryou Nihei, Shinsuke Sakakibara, Tamio Arai
44. Development of a Computer Aided Procedure to Control Division of Labour Based Disassembly Systems
Gert Zülch, Jan Hrdina, Rainer Schwarz
45. A New Method to Control Work-in-Process Inventory for High Manufacturing Productivity
Rei Hino, Norikazu Suzuki, Eiji Shamoto
46. An Evolutionary Algorithm for Vehicle Routing Problem with Real Life Constraints
Giuseppe Confessore, Graziano Galiano, Giuseppe Stecca
47. Integrated Data Management in Factory Planning and Factory Operation. An Information Model and its Implementation
Tobias Weimer, Ralf Kapp, Peter Klemm, Engelbert Westkämper
48. Future Challenges in Process/Resource Planning Due to Increasing (Product) Variants
Lars Weyand, Helmut Bley
49. Modernisation of Industrial Engineering. Enhanced Participation of Employees
Detlef Gerst
50. Towards Optimal Worker Assistance: Investigating Cognitive Processes in Manual Assembly
Christian Stoessel, Mathey Wiesbeck, Sonja Stork, Michael F. Zaeh, Anna Schuboe
51. Social aspects of Plant monitoring and visualization
Kristian Martinsen, Halvor Holtskog
52. Cluster Manufacturing Management to Improve Equipment Efficiency and Productivity
Suthep Butdee, Serge Tichkiewitch
53. Penalty Distribution Method for Scheduling Based Supply Chain Management
Jia Yee Chai, Tatsuhiko Sakaguchi, Keiichi Shirase
54. Social contract based manufacturing scheduling with combinatorial auction mechanism
Toshiya Kaihara, Kentaro Sashio, Katsuhito Miura
55. Agent-based Dynamic Process Planning and Scheduling in Flexible Manufacturing System
Hossein Tehrani Nik Nejad, Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu
56. GA Based Reactive Scheduling for Aggregate Production Scheduling
Tatsuhiko Sakaguchi, Toshihide Kamimura, Keiichi Shirase, Yoshitaka Tanimizu
57. Development of a Multi-Agent Model for Production Scheduling in Innovative Flexible Manufacturing System
Ilaria Baffo, Giuseppe Confessore, Giuseppe Stecca
58. A Real-time Scheduling Method Considering Human Operators in Autonomous Distributed Manufacturing Systems
Koji Iwamura, Shinya Kuwahara, Yoshitaka Tanimizu, Nobuhiro Sugimura
59. Production Scheduling System with Dynamic Lot Size in Case of Considering Set-up Time
Minoru Koike, Akira Tsumaya, Ryota Matsui, Eiji Morinaga, Hirofumi Wakamatsu, Eiji Arai
60. The Impact of Lot Splitting in a Single Machine Scheduling Problem with Earliness - Tardiness Penalties
Chinyao Low, Yuling Yeh
61. Integration of Process Planning and Scheduling Using Multi-Agent Learning
Nobutada Fujii, Riku Inoue, Kanji Ueda
62. Module Structured Production System
Kuniaki Tanaka, Nobuo Nakatsuka, Hironori Hibino, Yoshiro Fukuda
63. Lean Production System Design from the Perspective of the Viable System Model
Christoph Herrmann, Lars Bergmann, Philipp Halubek, Sebastian Thiede
64. Implementation Strategy for a Flexibility Oriented Production System
Felipe A. Gómez Kempf, Jan C. Aurich, Olaf Drews
65. A Study of Design Factors for Information Supporting System in Cell Production
Ye Zhang, Feng Duan, Jeffrey Too Chuan Tan, Kei Watanabe, Nuttapol Pongthanya, Masao Sugi, Hiroshi Yokoi, Tamio Arai
66. On Reconfigurable Robotic Working Cells — a Case Study
Mikael Hedelind
67. Linking Modules for Reconfigurable Manufacturing Systems
Uwe Heisel, Walther Maier, Alexander Bader
68. Global Footprint Design
Günther Schuh, Sebastian Gottschalk, Philipp Attig, Axel Hoeschen
69. TSUNAMI Effect Prediction Methodology for Critical Resource Analysis
Youichi Nonaka, Yuichi Suginishi, Attila Lengyel, Makoto Ono, Koichi Sugimoto
70. Factory-in-a-box — Demonstrating the next generation manufacturing provider
Mats Jackson, Magnus Wiktorsson, Monica Bellgran
71. Planning the use of high-power excimer laser for psoriasis treatment
Hinnerk Hagenah, Michael Schmidt, Florian Klämpfl
72. Optimization Strategies of Laser Hardening of Hypo-eutectoid Steel
Giovanni Tani, Leonardo Orazi, Alessandro Fortunato, Giampaolo Campana, Alessandro Ascari, Gabriele Cuccolini
73. Fabrication of Wire Saw with Patterned Hard Bumps by Electrical Discharge Machining with Powder Suspended in Working Oil
Katsushi Furutani, Yasuo Murase
74. Creation of Cross-Section Changing Hole with a Hemisphere by Means of Electrical Discharge Machining
T. Ishida, H. Nagasawa, M. Kita, Y. Takeuchi
75. Study of Cutting Temperature in Cold-Air Milling of Ti6Al4V Alloy
Feng Jiang, Jianfeng Li, Yiming (Kevin) Rong, Jie Sun, Song Zhang
76. Environmentally Friendly Machining of Aluminum Using Minimal Quantity Lubrication System
Toshiaki Wakabayashi, Satoshi Suda
77. An Evolutionary Strategy for Optimizing Multi-pass Turning Operation under Dry Machining Conditions
Yi-Chi Wang, Yi-Che Chiu
78. Proposal of Real-Time Balancing mechanism Using Magnetic Fluid for Machine Tool Spindle
Keiichi Nakamoto, Kazuhiko Adachi, Keiichi Shirase
79. Prototyping of Autonomous CNC Machine Tool Based on Digital Copy Milling Concept
Keiichi Shirase, Takashi Shimada, Keiichi Nakamoto
80. Intricate Shaped Manufacturing by 6-Axis Non-rotational Cutting with the Application of Ultrasonic Vibrations
Feliciano H. Japitana, Koichi Morishige, Yoshimi Takeuchi
81. Expanding the possibilities of position error compensation in CAM for PKM milling machines
Jan Los, Tetsuo Tomiyama, Tetsuro Shibukawa, Yoshimi Takeuchi
82. Optimization of Toolpath Generation in Medical CAM for a Machine Tool for Orthopedic Surgery
Naohiko Sugita, Takayuki Osa, Yoshikazu Nakajima, Mamoru Mitsuishi
83. Development of CAM system to Estimate Tool Wear of ball-end-milling
CheolWon Song, Hideki Aoyama
84. Model based control of a piezo-actuated axis
Christian Brecher, Gunnar Schauerte, Michael Merz
85. Register Control of Sectional Drive Rotogravure Printing Press
Tsuguaki Yoshida, Shinichiro Takagi, Yasuhiko Muto, Teilong Shen
86. Incremental Sheet Forming with a Robot System for an Industrial Application
Arnold Puzik
87. Multi-Technology Platform for Hybrid Metal Processing
Christian Brecher, Frank Hoffmann, Andreas Karlberger, Chris-Jörg Rosen
88. Super-Resolution Imaging for Automatic Visual Inspection Systems
Hiroyuki Nakai, Yasuhiro Ueda, Yoshihide Shigeyama
89. Instrumented fixtures for on-line correction of welding paths
T. K. Lien, M. Lind
90. Surface Roughness and Microstructure in Ultrasonically Assisted Turning of W-Fe-Ni Alloy
Jie Chen, Guangxue Tian, Yonggang Chi, Mei Liu, Dongwei Shan, Yuelin Liu
91. Finishing Complex Surfaces with Zonal Polishing Tools
Fritz Klocke, Christian Brecher, Richard Zunke, Roland Tuecks
92. Sub-wavelength Pitched Cubic Mosaic Multi-layer Precisely Pressed by Nano-features Mold for Multi-functional Optical Elements
M. Nakao, K. Nagato, H. Suzuki, T. Nishino, H. Yonemoto, H. Kaito, T. Hamaguchi, K. Tsuchiya
93. Simulation of Workpiece Kinematics in Centreless Throughfeed Grinding
Peter Krajnik, Radovan Drazumeric, Ivan Vengust, Rok Vrabic, Bernd Meyer, Janez Kopac, Fritz Klocke
94. Development of an electroplated polishing tape applying electrodeposited nickel foil method
Kentaro Miyazaki, Yasuhiro Tani, Kensuke Tsuchiya, Yasuyuki Kamimura
95. Development of Ultrafine-Crystalline cBN Abrasive Grains for Innovative Grinding Technology
Yoshio Ichida, Ryunosuke Sato, Hitoshi Kajino
96. System for Planning of Resources in IPS
Horst Meier, Christian M. Krug
97. Product Diffusion in a Market with Network Externalities: An Approach from the Viewpoint of Value-creation among Consumers
Nariaki Nishino, Takeshi Takenaka, Kanji Ueda
98. Cost Evaluation Method for Service Design Based on Activity Based Costing
Koji Kimita, Tatsunori Hara, Yoshiki Shimomura, Tamio Arai
99. Definition of Design Operation for Service
Koji Harada, Tamio Arai, Tatsunori Hara, Yoshiki Shimomura
100. Industrial Product-Service-Systems - Typology of Service Supply Chain for IPS
Horst Meier, Oliver Völker
101. A Method of Supporting Conflict-Solving for Service Design
Yoshiki Akiyama, Yoshiki Shimomura, Tamio Arai
102. Learning networks: a method for Integrated Product and Service Engineering — experience from the IPSE project
Mattias Lindahl, Gunilla Ölundh Sandström, Erik Sundin, Anna Öhrwall Rönnbäck, Johan Östlin
103. Proposal of Idea Generation Support Methodology for Eco-Business
Yasushi Umeda, Takuya Nishioka, Shinichi Fukushige, Shinsuke Kondoh, Shozo Takata
104. Multi-Agent Market Modeling Based on Analysis of Consumer Lifestyles
Tomomi Kito, Kousuke Fujita, Takeshi Takenaka, Kanji Ueda
105. Strategic Servicification — A Quality based approach beyond Service-Engineering
Robert Schmitt, Sarah Hatfield
106. From product to service orientation in the maritime equipment industry - a case study
Detlef Matzen, Tim C. McAloone
107. Knowledge Generation as a Means to Improve Development Processes of Industrial Product-Service Systems
Günther Seliger, René Gegusch, Patrick Müller, Lucienne Blessing
108. Modelling Approach for the Integrated Development of Industrial Product-Service Systems
Ewald Georg Welp, Horst Meier, Tim Sadek, Katja Sadek
109. Integrating function model and activity model for design of service
Tatsunori Hara, Tamio Arai, Yoshiki Shimomura
110. Remanufacturing of Products used in Product Service System Offerings
Erik Sundin, Johan Östlin, Anna Öhrwall Rönnbäck, Mattias Lindahl, Gunilla Ölundh Sandström
111. Integrated Design of Industrial Product-Service Systems
Jan C. Aurich, Eric Schweitzer, Carsten Mannweiler
112. Evaluation of Product-Service Systems During Early Design Phase
Nicolas Maussang, Peggy Zwolinski, Daniel Brissaud
Nyckelord: Engineering, Manufacturing, Machines, Tools, Industrial and Production Engineering, Technology Management, Machinery and Machine Elements, Control Engineering
- Författare
- Mitsuishi, Mamoru
- Ueda, Kanji
- Kimura, Fumihiko
- Utgivare
- Springer
- Utgivningsår
- 2008
- Språk
- en
- Utgåva
- 1
- Sidantal
- 571 sidor
- Kategori
- Teknologi, energi, trafik
- Format
- E-bok
- eISBN (PDF)
- 9781848002678