Linking Models and Experiments, Volume 2

1. Modal Testing and FE-model Validation of Azimuthing Thruster
Vesa Nieminen, Matti Tervonen

2. POD based computation of Joint Interface Modes
Wolfgang Witteveen, Karim Sherif

3. Area wise application of contact constraints in reduced mechanical systems
Wolfgang Witteveen

4. On the extension of global vibration modes with Ritz-vectors needed for local effects
Karim Sherif, Wolfgang Witteveen, Hans Irschik, Helmut Holl, Karl Mayrhofer

5. Direct decoupling of substructures using primal and dual formulation
Walter D’Ambrogio, Annalisa Fregolent

6. Spectral analysis of vibrating plates with general shape
Giuseppe Catania, Silvio Sorrentino

7. Smoothing experimental data in dynamic substructuring of built up systems
A. Culla, W. D’Ambrogio, A. Fregolent, A. Schiavone

8. Metrics for Diagnosing Negative Mass and Stiffness when Uncoupling Experimental and Analytical Substructures
Mathew S. Allen, Daniel C. Kammer, Randy L. Mayes

9. Propagation of Free-Interface Substructure Uncertainty into System Test-Analysis Correlation
Daniel C. Kammer, Sonny Nimityongskul, Dimitri Krattiger

10. Feature Extraction for Structural Dynamics Model Validation
Mayuko Nishio, Francois Hemez, Keith Worden, Gyuhae Park, Nobuo Takeda, Charles Farrar

11. Hybrid Sets of Merged Data for Modal Model Applications
Louis Thibault, Bruce LeBlanc, Peter Avitabile

12. Dynamic Uncoupling of a System Model for Component Identification
David Cloutier, Peter Avitabile

13. Full Field Dynamic Stress/Strain from Limited Sets of Measured Data
Pawan Pingle, Peter Avitabile

14. Limited Experimental Displacement Data used for obtaining Full-Field Dynamic Stress Strain Information
Pawan Pingle, Peter Avitabile

15. A Survey of Techniques to Estimate the Uncertainty in Material Parameters
Todd Simmermacher

16. Construction of DEM-base Traffic Model Using Optimal Velocity Model
Takayuki Koizumi, Nobutaka Tsujiuchi, Ryota Akatsuka

17. Confidence Intervals of Modal Parameters during Progressive Damage Test
Michael Döhler, Falk Hille, Xuan-Binh Lam, Laurent Mevel, Werner Rücker

18. Identification of Material Properties of Composite Plates Utilizing Model Updating and Response Surface Techniques
Kenan Gurses, Bayindir Kuran, Caner Gencoglu

19. Globally enriched substructuring techniques for vibro-acoustic simulation
Umut Tabak, Daniel J. Rixen

20. A Modal-Geometrical Selection Criterion for Master Nodes: Numerical and Experimental Testing
Elvio Bonisoli, Cristiana Delprete, Carlo Rosso

21. Robust optimization and quality control in spot welded structures
Q. I. Bhatti, M. Ouisse, S. Cogan

22. Interface Reduction in the Dual Craig-Bampton method based on dual interface modes
Daniel J. Rixen

23. A Truly Hybrid Approach to Substructuring Problems Using Mixed Assembly and Implicit Solving Strategies
S. N. Voormeeren, P. L. C. Valk, D. J. Rixen

24. Model updating methodologies for multibody simulation models: application to a full-scale wind turbine model
Simone Manzato, Bart Peeters, Alessandro Toso, Herman Auweraer, Richard Osgood

25. DOF Reduction Strategy for Large Order Finite Element Models
Robert N. Coppolino

26. Understanding Large Order Finite Element Model Dynamic Characteristics
Robert N. Coppolino

27. FEM Sensitivity Method for Uncertainty and Reconciliation Analyses
Robert N. Coppolino

28. Uncoupling Techniques for the Dynamic Characterization of Sub-structures
F. C. Batista, N. M. M. Maia

29. Receptance Based Normalization of Operational Mode Shapes
D. Bernal

30. Fault Simulation in a Gearbox Using Finite Element Model Reduction Techniques
L. Deshpande, N. Sawalhi, R. B. Randall

31. Response Measurements of DMS Cabinets and Supporting Truss Structures under Environmental and Transient Wind Loads
Robert W. Bolton, Brent Phares, Terry J. Wipf

32. Variance Decomposition in the Presence of Epistemic and Aleatory Uncertainty
John McFarland, David Riha

33. A Forecasting Metric for Predictive Modeling
Sezer Atamturktur, François Hemez, Cetin Unal

Nyckelord: Engineering, Appl.Mathematics/Computational Methods of Engineering, Aerospace Technology and Astronautics, Structural Mechanics