Advanced Materials Modelling for Structures

1. Micromechanical Modelling of Void Healing
Shireen Afshan, Daniel Balint, Jianguo Lin, Didier Farrugia

2. Surface Viscoelasticity and Effective Properties of Materials and Structures
Holm Altenbach, Victor A. Eremeyev

3. High-Temperature Inelastic Behavior of the Austenitic Steel AISI Type 316
Holm Altenbach, Yevgen Gorash

4. Finite Element Modelling of the Thermo-Mechanical Behaviour of a 9Cr Martensitic Steel
R. A. Barrett, P. E. O’Donoghue, S. B. Leen

5. Enhanced Global Digital Image Correlation for Accurate Measurement of Microbeam Bending
L. I. J. C. Bergers, J. Neggers, M. G. D. Geers, J. P. M. Hoefnagels

6. An Investigation of the Mechanical Properties of Open Cell Aluminium Foam Struts: Microtensile Testing and Modelling
Charles Betts, Daniel Balint, Jianguo Lin

7. Multiscale Optimization of Joints of Dissimilar Materials in Nature and Lessons for Engineering Applications
Victor Birman, Yanxin Liu, Stavros Thomopoulos, Guy M. Genin

8. Some Consequences of Stress Range Dependent Constitutive Models in Creep
James T. Boyle

9. Micro-Mechanical Numerical Studies on the Stress State Dependence of Ductile Damage
Michael Brünig, Steffen Gerke, Vanessa Hagenbrock

10. Characterization of Load Sensitive Fatigue Crack Initiation in Ti-Alloys Using Crystal Plasticity Based FE Simulations
P. Chakraborty, S. Ghosh

11. Creep Crack Growth Modelling in 316H Stainless Steel
Catrin M. Davies, Ali Mehmanparast

12. On the Non Saturation of Cyclic Plasticity Law: A Power Law for Kinematic Hardening
Rodrigue Desmorat

13. Micromechanical Studies of Deformation, Stress and Crack Nucleation in Polycrystal Materials
F. P. E. Dunne, C. Sweeney

14. Modelling of Coupled Dissipative Phenomena in Engineering Materials
Halina Egner, Władysław Egner

15. Damage Deactivation of Engineering Materials and Structures
Artur Ganczarski, Marcin Cegielski

16. Effect of Orientation and Overaging on the Creep and Creep Crack Growth Properties of 2xxx Aluminium Alloy Forgings
Elisabetta Gariboldi, Antonietta Lo Conte

17. Dislocation-Induced Internal Stresses
Peter Geantil, Benoit Devincre, Michael E. Kassner

18. A Strain Rate Sensitive Formulation to Account for the Effect of Rafting on the High Temperature Mechanical Properties of Ni-Based Single Crystal Superalloys
Jean-Briac Graverend, Jonathan Cormier, Serge Kruch, Franck Gallerneau, José Mendez

19. An Overview of Small Specimen Creep Testing
T. H. Hyde, W. Sun, C. J. Hyde

20. Kelvin Modes Based Cubic Plasticity and Induced Anisotropic Damage: Application to Creep of AM1 Single Crystal
Roxane Marull, Rodrigue Desmorat

21. A Grand Master Curve Approach for Off-Axis Creep Rupture Behavior of Orthotropic Fiber Composites at Different Temperatures
Masamichi Kawai

22. Recent Advances in the Processing and Properties of Ultrafine-Grained Metals Prepared Using Severe Plastic Deformation
Terence G. Langdon

23. Macro/Micro Elastic-Viscoplastic Analysis of Woven Composite Laminates with Misaligned Woven Fabrics
Tetsuya Matsuda, Shinya Kanamaru, Naoya Honda, Nobutada Ohno

24. A Masing-Type Modelling Concept for Cyclic Plasticity at Elevated Temperature
Thomas Mayer, Edoardo Mazza, Stuart R. Holdsworth

25. Phase-Field Simulation of Microstructural Evolution in Nickel-Based Superalloys During Creep and in Low Carbon Steels During Martensite Transformation
Yoshinori Murata, Yuhki Tsukada, Toshiyuki Koyama

26. Viscoplastic Constitutive Model to Divide Inelastic Strain into Time-Independent and Time-Dependent Strains
Ken- ichi Ohguchi, Katsuhiko Sasaki

27. Multiaxial Low Cycle Fatigue for Ni-Base Single Crystal Super Alloy at High Temperature
Masao Sakane, Shengde Zhang, Akira Yoshinari, Noriaki Matsuda, Nobuhiro Isobe

28. Mechanics of Materials for Microelectronic Components and Packages
Vadim V. Silberschmidt

29. Constitutive Models for the Description of Creep and Plasticity of Cast and Wrought Mg-Al and Mg-Zn Alloys
Stefano Spigarelli, Mohamad El Mehtedi, A. Di Salvia

30. Deformation and Failure of Various AlloysUnder Creep-Fatigue Loading and Their Modelling
Yukio Takahashi

31. The Effect of Temperature on Interfacial Gradient Plasticity in Metallic Thin Films
George Z. Voyiadjis, Danial Faghihi

32. A Cyclic Crystal Viscoplastic Model Considering Both Dislocation Slip and Twinning
Chao Yu, Guozheng Kang, Qianhua Kan, Otto T. Bruhns, Chuanzeng Zhang

Avainsanat: Materials Science, Characterization and Evaluation of Materials, Continuum Mechanics and Mechanics of Materials, Computational Science and Engineering, Structural Mechanics