Böllinghaus, Thomas
Hot Cracking Phenomena in Welds III
1. Hot Cracking in Welds of Aluminum and Magnesium Alloys
S. Kou, V. Firouzdor, I.W. Haygood
2. Critical Conditions for Weld Solidification Crack Growth
Carl E. Cross, N. Coniglio, P. Schempp, M. Mousavi
3. Hot Tearing Test for TIG Welding of Aluminum Alloys: Application of a Stress Parallel to the Fusion Line
A. Niel, F. Deschaux-Beaume, C. Bordreuil, G. Fras, J.-M. Drezet
4. Hot Cracking Susceptibility of Wrought 6005 and 6082 Aluminum Alloys
Paul Kah, Jukka Martikainen, Esa Hiltunen, Fisseha Brhane, Victor Karkhin
5. Prediction of Liquation Crack Initiation in Al-Mg-Si Alloy Welded Joints
Jukka Martikainen, Esa Hiltunen, Fisseha Brhane, Victor Karkhin, S. Ivanov
6. Hot Tearing Sensitivity of Al-Mg-Si Alloys Evaluated by X-Ray Microtomography After Constrained Solidification at High Cooling Rate
E. Giraud, M. Suéry, J. Adrien, E. Maire, M. Coret
7. Short Term Metallurgy and Hot Cracking During Laser Beam Welding of Austenitic Stainless Steels
Thomas Böllinghaus, A. Gumenyuk, V. Quiroz
8. Laser Weldability of Stainless Steel
Carl E. Cross, N. Coniglio, E.M. Westin, A. Gumenyuk
9. Weld Solidification Cracking in 304 to 304L Stainless Steel
P.W. Hochanadel, T.J. Lienert, J.N. Martinez, R.J. Martinez, M.Q. Johnson
10. Solidification Cracking Studies in Multi Pass Laser Hybrid Welding of Thick Section Austenitic Stainless Steel
Miikka Karhu, Veli Kujanpää
11. Influence of Minor and Impurity Elements on Hot Cracking Susceptibility of Extra High-Purity Type 310 Stainless Steels
K. Nishimoto, K. Saida, K. Kiuchi, J. Nakayama
12. Investigations on Hot Cracking of Novel High Manganese TWIP-Steels
D. Keil, M. Zinke, H. Pries
13. Solidification Cracking Susceptibility in C-Mn Steel CO
M. F. Gittos, S.M.I. Birch, R.J. Pargeter
14. Application of Solidification Models for Controlling the Microstructure and Hot Cracking Response of Engineering Alloys
John N. DuPont
15. In Situ Observations of Ductility-Dip Cracking Mechanism in Ni-Cr-Fe Alloys
J. S. Unfried, E.A. Torres, A.J. Ramirez
16. Further Development of the Cast Pin Tear Test for Evaluating Solidification Cracking in Ni-Base Alloys
B. T. Alexandrov, John Lippold
17. Behavior and Hot Cracking Susceptibility of Filler Metal 52M (ERNiCrFe-7A) Overlays on Cast Austenitic Stainless Steel Base Materials
Steven L. McCracken, Richard E. Smith
18. Investigation of Weld Crack Mitigation Techniques with Advanced Numerical Modeling and Experiment – Summary
Y. P. Yang, S.S. Babu, J.M. Kikel, F.W. Brust
19. Weld Cracking Susceptibility of Alloy C-22 Weld-Metal
M. L. Gallagher, John Lippold
20. Weldability of a New Ni-Cu Welding Consumable for Joining Austenitic Stainless Steels
J. W. Sowards, B.T. Alexandrov, John Lippold, G.S. Frankel
21. Metallurgical Response of Electron Beam Welded Allvac
J. Andersson, G. Sjöberg, H. Hänninen
22. Stray Grain Formation and Solidification Cracking Susceptibility of Single Crystal Ni-Base Superalloy CMSX-4
John N. DuPont, T.D. Anderson
Avainsanat: Materials Science, Metallic Materials, Continuum Mechanics and Mechanics of Materials
- Tekijä(t)
- Böllinghaus, Thomas
- Lippold, John
- Cross, Carl E.
- Julkaisija
- Springer
- Julkaisuvuosi
- 2011
- Kieli
- en
- Painos
- 1
- Sivumäärä
- 18 sivua
- Kategoria
- Tekniikka, energia, liikenne
- Tiedostomuoto
- E-kirja
- eISBN (PDF)
- 9783642168642