Login

Boukharouba, Taoufik

Damage and Fracture Mechanics

Boukharouba, Taoufik - Damage and Fracture Mechanics, ebook

308,80€

Ebook, PDF with Adobe DRM
ISBN: 9789048126699
DRM Restrictions

PrintingNot allowed
Copy to clipboardNot allowed

Table of contents

1. Determination of the Hardness of the Oxide Layers of 2017A Alloys
Chahinez Fares, Taoufik Boukharouba, Mohamed El Amine Belouchrani, Abdelmalek Britah, Moussa Naït Abdelaziz

2. Effect of Non-Metallic Inclusions on Hydrogen Induced Cracking
Mimoun Elboujdaini, Winston Revie

3. Defect Assessment on Pipe Transporting a Mixture of Natural Gas and Hydrogen
Guy Pluvinage

4. Reliability Analysis of Low Alloy Ferritic Piping Materials
A. Guedri, B. Merzoug, Moe Khaleel, A. Zeghloul

5. Experimental Characterization and Effect of the Triaxiality on the Behavior of the HDPE
K. Hachour, R. Ferhoum, M. Aberkane, F. Zairi, M. Nait Abdelaziz

6. Effects of Aggressive Chemical Environments on Mechanical Behavior of Polyethylene Piping Material
Souheila Rehab-Bekkouche, Nadjette Kiass, Kamel Chaoui

7. Hydrogen Embrittlement Enhanced by Plastic Deformation of Super Duplex Stainless Steel
A. Elhoud, N. Renton, W. Deans

8. Hydrogen Effect on Local Fracture Emanating from Notches in Pipeline Steels
Julien Capelle, Igor Dmytrakh, Joseph Gilgert, Guy Pluvinage

9. Reliability Assessment of Underground Pipelines Under Active Corrosion Defects
A. Amirat, A. Benmoussat, K. Chaoui

10. An Overview of the Applications of NDI/NDT in Engineering Design for Structural Integrity and Damage Tolerance in Aircraft Structures
A. M. Abdel-Latif

11. Improvement in the Design of Automobile Upper Suspension Control Arms Using Aluminum Alloys
M. Bouazara

12. Performances of Vehicles'Active Suspensions
Nadhira Kheznadji Messaoud-Nacer

13. Damaging Influence of Cutting Tools on the Manufactured Surfaces Quality
Idriss Amara, Embarek Ferkous, Fayçal Bentaleb

14. Design and Test of a Sandwich T-Joint for Naval Ships
Lotfi Hamitouche, Mostapha Tarfaoui, Alain Vautrin

15. Vibroacoustic Sources Identification of Gear Mechanism Transmission
Abbassia Derouiche, Nacer Hamzaoui, Taoufik Boukharouba

16. Prediction of Structural and Dynamic Behaviors of Impacted Plates
Abdelhamid Miloudi, Mahmoud Neder

17. Application of Structural INTegrity Assessment Procedure to Nuclear Power Plant Component
Nenad Gubeljak, Jozef Predan

18. Failure Assessment Diagrams in Structural Integrity Analysis
Yu. G. Matvienko

19. Degradation and Failure of Some Polymers (Polyethylene and Polyamide) for Industrial Applications
Boubaker Bounamous, Kamel Chaoui

20. On the Structural Integrity of the Nano-PVD Coatings Applied on Cutting Tools
Miroslav Piska, Ales Polzer, Petra Cihlarova, Dagmar Stankova

21. Investigation of Energy Balance in Nanocrystalline Titanium Under Cyclic Loading
O. Plekhov, O. Naimark, R. Valiev, I. Semenova

22. Behavior of Stainless Steel 316L Under Impact Test
M. Benachour, A. Hadjoui, F. Z. Seriari

23. Spall Fracture in ARMCO Iron: Structure Evolution and Spall Strength
Oleg Naimark, Sergey Uvarov, Vladimir Oborin

24. Damage Modelling of Impacted Tubular Structures by Using Material Property Degradation Approach
Mostapha Tarfaoui, Papa Birame Gning, Francis Collombet

25. Fracture Control for Northern Pipelines
W. R. Tyson

26. The Influence of the Interface on Fracture Parameters
L. Marsavina, T. Sadowski

27. Crack Propagation in the Vicinity of the Interface Between Two Elastic Materials
Luboš Náhlík, Lucie Šestáková, Pavel Hutař

28. Fracture Behaviour of TiAl Intermetalics
Ivo Dlouhý, Zdenĕk Chlup, Hynek Hadraba, Vladislav Kozák

29. Numerical and Experimental Investigations of Mixed Mode Fracture in Granite Using Four-Point-Bend Specimen
M. R. M. Aliha, M. R. Ayatollahi, B. Kharazi

30. Experimental and Numerical Determination of Stress Intensity Factors of Crack in Plate with a Multiple Holes
S. Belamri, T. Tamine, A. Nemdili

31. Dynamic Response of Cracked Plate Subjected to Impact Loading Using the Extended Finite Element Method (X-FEM)
R. Tiberkak, M. Bachene, B.K. Hachi, S. Rechak, M. Haboussi

32. On Heterogeneity of Welded Joint by Modelling of Diffusion
L. Řeháčková, J. Kalousek, J. Dobrovská

33. Correlation of Microstructure and Toughness of the Welded Joint of Pipeline Steel X65
Rrahim Maksuti, Hamit Mehmeti, Hartmut Baum, Mursel Rama, Nexhat Çerkini

34. Effect of the Residual Fatigue Damage on the Static and Toughness Properties
P. Cadenas, A. Amrouche, G. Mesmacque, K. Jozwiak

35. Influence of Fatigue Damage in Dynamic Tensile Properties of AISI 4140T Steel
U. Sánchez-Santana, C. Rubio-González, G. Mesmacque, A. Amrouche

36. Low-Cycle Fatigue of Al—Mg Alloys
M. Bournane, M. Bouazara, L. St-Georges

37. Damage of Glulam Beams Under Cyclic Torsion: Experiments and Modelling
Myriam Chaplain, Zahreddine Nafa, Mohamed Guenfoud

38. Statistical Study of Temperature Effect on Fatigue Life of Thin Welded Plates
Abdelmadjid Merabtine, Kamel Chaoui, Zitouni Azari

39. Residual Stress Effect on Fatigue Crack Growth of SENT Specimen
M. Benachour, M. Benguediab, A. Hadjoui

40. Analysis of Elliptical Cracks in Static and in Fatigue by Hybridization of Green's Functions
B. K. Hachi, S. Rechak, M. Haboussi, M. Taghite, Y. Belkacemi, G. Maurice

41. Influence of Coating on Friction and Wear of Combustion Engine Piston Rings
Abdelkader Guermat, Guy Monteil, Mostefa Bouchetara

42. Optimization Constrained of the Lifetime of the CBN 7020 During the Machining of Steel 100 Cr6
Slimane Benchiheb, Lakhdar Boulanouar

43. Comparison of Simulation Methods of Pulsed Ultrasonic Fields Radiated in Isotropic Solids
W. Djerir, T. Boutkedjirt, A. Badidi Bouda

44. Investigation of Ag Doping Effects on Na1.5Co2O4 Elastic Parameters
Ibrahim Al-Suraihy, Abdellaziz Doghmane, Zahia Hadjoub

45. The Dynamics of Compressible Herschel—Bulkley Fluids in Die-Swell Flows
F. Belblidia, T. Haroon, M. F. Webster

46. Numerical Simulation of the Behaviour of Cracks in Axisymmetric Structures by the Dual Boundary Element Method
N. Amoura, H. Kebir, S. Rechak, J. M. Roelandt

47. Numerical Evaluation of Energy Release Rate for Several Crack Orientation and Position to the Bi-Material Interface Plates
N. Kazi Tani, T. Tamine, G. Pluvinage

48. Numerical Simulation of the Ductile Fracture Growth Using the Boundary Element Method
Gaëtan Hello, Hocine Kebir, Laurent Chambon

49. Enriched Finite Element for Modal Analysis of Cracked Plates
M. Bachene, R. Tiberkak, S. Rechak, G. Maurice, B. K. Hachi

50. A New Generation of 3D Composite Materials: Advantage and Disadvantage
Z. Aboura, K. Khellil, M. L. Benzeggagh, A. Bouden, R. Ayad

51. Benefit from Embedded Sensors to Study Polymeric Composite Structures
Francis Collombet, Matthieu Mulle, Hilario-Hernandez Moreno, Redouane Zitoune, Bernard Douchin, Yves-Henri Grunevald

52. Effect of Temperature and Initiator on Glass Fibre/Unsaturated Polyester Composite: Cross-linking, Mechanical Properties
Nabila Belloul, Ali Ahmed-Benyahia, Aicha Serier, Nourdine Ouali

53. Theoretical and Experimental Investigations of the Plane Strain Compression of Amorphous Polymers in the form of a Flat Plate
Nourdine Ouali, Krimo Azouaoui, Ali Ahmed Benyahia, Taoufik Boukharouba

54. Wavelet-Based Multifractal Identification of Fracture Stages
Djedjiga Ait Aouit, Abdeldjalil Ouahabi

55. Characterization of Mixed Mode Delamination Growth and Thresholds
M. Kenane, M. L. Benzeggagh

56. Modification of Cellulose for an Application in the Waste Water Treatment
Lamia Timhadjelt, Aicha Serier, Karima Boumerdassi, Mohamed Serier, Zoubir Aîssani

57. A Full 3D Simulation of Plastic Forming Using a Heuristic Generalised Contact Algorithm
Tewfik Ghomari, Rezak Ayad, Nabil Talbi

58. A Novel Approach for Bone Remodeling After Prosthetic Implantation
Habiba Bougherara, Václav Klika, František Maršík, Ivo A. Mařík, L'Hocine Yahia

59. Hybrid Composite-Metal Hip Resurfacing Implant for Active Patient
Habiba Bougherara, Marcello Papini, Michael Olsenb, Radovan Zdero, Paul Zalzal, Emil H. Schemitsch

60. Anisotropic and Unilateral Damage Application to Concrete
O. Bélaidi Chabane Chaouche, N. E. Hannachi, Y. Labadi

61. The Behaviour of Self-Compacting Concrete Subjected to an External Sulphate Attack
Riçal Khelifa, Xavier Brunetaud, Hocine Chabil, Muzahim Al-Mukhtar

62. Mixed Finite Element for Cracked Interface
S. Bouziane, H. Bouzerd, M. Guenfoud

63. Three-Dimensional T-Stress to Predict the Directional Stability of Crack Propagation in a Pipeline with External Surface Crack
M. Hadj Meliani, H. Moustabchir, A. Ghoul, S. Harriri, Z. Azari

Keywords: Engineering, Structural Mechanics, Engineering Design, Building Materials

Author(s)
 
 
Publisher
Springer
Publication year
2009
Language
en
Edition
1
Page amount
25 pages
Category
Technology, Energy, Traffic
Format
Ebook
eISBN (PDF)
9789048126699

Similar titles