Patel, Himanshu C.

Proceedings of International Conference on Advances in Tribology and Engineering Systems

Patel, Himanshu C. - Proceedings of International Conference on Advances in Tribology and Engineering Systems, ebook


Ebook, PDF with Adobe DRM
ISBN: 9788132216568
DRM Restrictions

PrintingNot allowed
Copy to clipboardNot allowed

Table of contents

Part I. Fluid Film Lubrication

1. Experimental Thermal Analysis of Bronze Elliptical and Offset-Halves Journal Bearing Profiles
Rakesh Sehgal

2. Effect of Bearing Deformation on the Performance of a Magnetic Fluid Based Infinitely Rough Short Porous Journal Bearing
M. E. Shimpi, G. M. Deheri

3. Effects of Velocity-Slip and Viscosity Variation in Squeeze Film Lubrication of Spherical Bearings
R. Raghavendra Rao, K. Gouthami, J. Vijaya Kumar

4. Magnetic Fluid-Based Squeeze Film Between Rotating Curved Rough Circular Plates
Nikhilkumar D. Abhangi, G. M. Deheri, Shruti S. Mehta

5. Performance of a Magnetic Fluid Based Squeeze Film Between Infinitely Long Rough Porous Rectangular Plates
R. M. Patel, G. M. Deheri, P. A. Vadher

6. Power Law Fluid Film Lubrication of Journal Bearing with Squeezing and Temperature Effects
Dhaneshwar Prasad, S. S. Panda, S. V. Subrahmanyam

7. Rough Porous Circular Convex Pad Slider Bearing Lubricated with a Magnetic Fluid
S. D. Shukla, G. M. Deheri

8. Slip Velocity and Roughness Effect on Magnetic Fluid Based Infinitely Long Bearings
Jimit R. Patel, Gunamani Deheri

9. Squeeze Film Performance in Parallel Rough Circular Disks Lubricated by Ferrofluid with Non-newtonian Couple Stress Effect
H. A. Patel, M. P. Patel, H. C. Patel, G. M. Deheri

10. The Performance Analysis of a Magnetic Fluid-Based Hydrodynamic Long Journal Bearing
N. S. Patel, D. P. Vakharia, G. M. Deheri, H. C. Patel

11. Thermo Hydrodynamic Lubrication Characteristics of Power Law Fluids in Rolling/Sliding Line Contact
Dhaneshwar Prasad, S. V. Subrahmanyam

12. Transient Analysis of Plain Circular Bearing with Micropolar Fluid
Rajiv Verma, Puneet Mathur

Part II. Friction and Wear

13. Effect of Cryogenic Treatment on Hardness, Microstructure and Wear Behavior of Hot Die Steel Grade AISI-H13
Sanjeev Katoch, Rakesh Sehgal, Vishal Singh

14. Experimental Study to Measure Piston Ring Assembly Friction of Multicylinder I.C. Engine (S.I.) on Motorized Engine Test Rig: A Case Study
Atul S. Shah, D. V. Bhatt

15. Influence of Surfactant in Hexaferrites as Wear Resistance
N. R. Panchal, R. B. Jotania

16. Investigations of Friction and Wear in Pultruded Glass Fibre Epoxy Composites
Piyush P. Gohil, Hiral H. Parikh, Vimal B. Patel

17. Morphology and Friction Characterization of CVD Grown Graphene on Polycrystalline Nickel
M. Tripathi, G. Paolicelli, S. Valeri

18. Optimization of Reciprocating Friction and Wear Test Rig Operating Parameters for Segmented Piston Ring: Liner Assembly
B. M. Sutaria, D. V. Bhatt

19. Strengthening Fiber-Matrix Adhesion to Improve Tribo-Performance of Composites
Nidhi Dureja, Ajay Kumar Kadiyala, Jayashree Bijwe

Part III. Lubricant

20. Ferrofluid Lubrication of Squeeze Film in Curved Circular Plates with Assorted Porous Structures
N. D. Patel, G. M. Deheri, S. S. Mehta

21. Lubrication for Microsystems
Sujeet K. Sinha

22. Study on the Effect of Blend Oil with Based Oil Analysis
B. M. Sutaria, M. K. Bhatt, B. K. Sonigra, D. V. Bhatt

23. Tribological Testing of Electrolyzed 17-4 PH Steel Against SS 440C Under Water Lubricated Condition
Neelima Khare, P. K. Limaye, N. L. Soni, R. J. Patel

Part IV. Machine Components and Bearing Design

24. Design and Development of Rotary Fixture for CNC with Tribology Considerations of Mechanics Analysis and Dynamic Balancing as Pre-mortem Tool
Nirav P. Maniar, D. P. Vakharia

25. Design and Kinematic Analysis of an Automatic Tool Changing Mechanism Used in VMC
M. B. Vaghela, V. J. Savsani, S. B. Jadeja

26. Effect of Elliptical Shaft Geometry on Non-dimensional Pressure and Load in Hydrodynamic Journal Bearings
P. C. Chhotani, D. P. Vakharia

27. Effect of Localized Defect on the Vibration Behavior of Cylindrical Roller Bearing-Rotor System
U. A. Patel, S. H. Upadhyay

28. Experimental Investigation on Life Cycle Analysis of the Moly (Mo) Coated Piston Ring in C. I. Engine
P. D. Patel, R. N. Patel, H. C. Patel, Pradip M. Patel

29. Load Capacity Analysis of Gas Foil Bearing (GFB) for Different Foil Materials
T. M. Jamir, S. K. Kakoty

30. Nonlinear Dynamic Behavior of Balanced Rotor Bearing System Due to Various Localized Defects
D. H. Pandya, S. H. Upadhyay, S. P. Harsha

31. Performance of a Magnetic Fluid Based Longitudinally Rough Short Bearing
P. I. Andharia, G. M. Deheri, Shruti Mehta

32. Prediction of Useful Life of Rolling Contact Bearings Using Monte Carlo Simulation Technique
Eshan Singh, G. D. Thakre, P. K. Arya, B. M. Shukla

33. Side Edge Effect on Elastic Contact Stress and Deformation
W. Wang, P. L. Wong, Z. M. Zhang

34. Smart Journal Bearing Using Giant Magnetostrictive Actuators
Z. M. Fang, Z. Li, W. Wang

Part V. Nano Technology/Tribology

35. Experimental Evaluation of the Tribological Properties of CuO Nano-Lubricants at Elevated Temperatures
Chacko Preno Koshy, P. K. Rajendrakumar, Manu V. Thottackkad

36. On Using Nanoporous Alumina Films as Tribological Coating
Arti Yadav, Prashant Pendyala, M. S. Bobji

37. Solid Particle Erosion of Luffa cylindrica Fiber Reinforced Polymer Composite
Niharika Mohanta, S. K. Acharya

38. Synthesis and Micro-Structural Characterization of CrAlN Coatings by Reactive Magnetron Sputtering
Hetal N. Shah, R. Jayaganthan

39. Tribology Characteristics of Cold Rolled Spray Cast Al–6Si–20Pb Alloy
R. Mittal, D. Singh

Part VI. Skeleton and Structural Systems

40. An Innovative Approximate Method for Analysis of Continuous Beam
D. J. Varia, H. S. Patel

41. Seismic Response of RC Elevated Water Tank Considering Site Specific Acceleration Time History
Chirag N. Patel, H. S. Patel

42. Soil-Foundation-Structure Interaction Effects in Seismic Behaviour of RC Elevated Water Tank
Chirag N. Patel, H. S. Patel

Part VII. Engineering System

43. Nonlinear Dynamic Analysis of High Speed Unbalanced Rotor Supported on Deep Groove Ball Bearings Considering the Preload Effect
H. K. Yadav, S. H. Upadhyay, S. P. Harsha

Part VIII. Bio-Tribology, Green Tribology and Biomimetics

44. Temperature Distribution in Living Tissue with Fractional Bioheat Model in Thermal Therapy
R. S. Damor, Sushil Kumar, A. K. Shukla

Keywords: Materials Science, Tribology, Corrosion and Coatings, Mechanical Engineering, Mechanics, Industrial and Production Engineering, Appl.Mathematics/Computational Methods of Engineering

Publication year
Lecture Notes in Mechanical Engineering
Page amount
28 pages
Technology, Energy, Traffic

Similar titles