Kannengiesser, Thomas

In-situ Studies with Photons, Neutrons and Electrons Scattering

Kannengiesser, Thomas - In-situ Studies with Photons, Neutrons and Electrons Scattering, ebook


Ebook, PDF with Adobe DRM
ISBN: 9783642147944
DRM Restrictions

PrintingNot allowed
Copy to clipboardNot allowed

Table of contents

1. In Situ Study of Phase Transformation in Steel During Welding
Yu-ichi Komizo, Hidenori Terasaki

2. In Situ Studies of Phase Transformation and Residual Stresses in LTT Alloys During Welding Using Synchrotron Radiation
Arne Kromm, Thomas Kannengiesser, Jens Gibmeier

3. In Situ Scanning Electron Microscopy High Temperature Deformation Experiments to Study Ductility Dip Cracking of Ni–Cr–Fe Alloys
E. A. Torres, F. G. Peternella, R. Caram, A. J. Ramírez

4. Grain Nucleation and Growth of Individual Austenite and Ferrite Grains Studied by 3DXRD Microscopy at the ESRF
S. E. Offerman, Hemant Sharma

5. Direct Analysis of Solidification-Mode During Welding for the Assessment of Hot-Cracking
Hidenori Terasaki, Yu-ichi Komizo

6. In Situ Synchrotron Study of Inclusions in the Weld Pool for the Assessment of Nucleation Potency of Acicular Ferrite
Hidenori Terasaki, Yu-ichi Komizo

7. Characterization of Solid State Phase Transformation in Continuously Heated and Cooled Ferritic Weld Metal
B. Narayanan, M. J. Mills, E. D. Specht, M. L. Santella, S. S. Babu

8. In Situ Determination of Phase Transformations and Structural Changes During Non-Equilibrium Material Processing
Boian T. Alexandrov, John C. Lippold

9. In Situ Phase Transformation Studies on a Transformation Induced Plasticity Steel Under Simulated Weld Thermal Cycles Using Synchrotron Diffraction
Murugaiyan Amirthalingam, M. J. M. Hermans, R. M. Huizenga, S. E. Offerman, J. Sietsma, I. M. Richardson

10. Imaging Fast Processes in Liquid Metal Foams and Semi-Solid Alloys Using Synchrotron Radioscopy with Spatio-Temporal Micro-Resolution
S. Zabler, A. Rack, F. García-Moreno, A. Ershov, T. Baumbach, J. Banhart

11. In Situ Measurements for Structural Integrity: An Engineer’s Perspective
J. A. Francis

12. In Situ Neutron Diffraction During Thermo-Mechanically Controlled Process for Low Alloy Steels
Y. Tomota, P. G. Xu, E. C. Oliver, A. Paradowska

13. Influence of Plastic Deformation on the Residual Stress Distribution and Fatigue Behaviour of High Strength Steels Welds
Mráz L’uboš, Leif Karlsson, Hamák Ivan, Mikula Pavol, Vrána Miroslav

Keywords: Materials Science, Metallic Materials, Continuum Mechanics and Mechanics of Materials, Solid State Physics

Publication year
Page amount
12 pages
Technology, Energy, Traffic

Similar titles