Antoun, Bonnie

Mechanics of Additive and Advanced Manufacturing, Volume 9

Antoun, Bonnie - Mechanics of Additive and Advanced Manufacturing, Volume 9, ebook


Ebook, PDF with Adobe DRM
ISBN: 9783319628349
DRM Restrictions

PrintingNot allowed
Copy to clipboardNot allowed

Table of contents

1. Fracture Properties of Additively Manufactured Acrylonitrile-Butadiene-Styrene Materials
Kevin R. Hart, Eric D. Wetzel

2. Complex Modulus Variation by Manipulation of Mechanical Test Method and Print Direction
Megan L. Liu, Katherine K. Reichl, Daniel J. Inman

3. A New Heat Transfer Simulation Model for Selective Laser Melting to Estimate the Geometry of Cross Section of Melt Pool
Hong-Chuong Tran, Yu-Lung Lo

4. Heat Conduction and Geometry Topology Optimization of Support Structure in Laser-Based Additive Manufacturing
Ehsan Malekipour, Andres Tovar, Hazim El-Mounayri

5. Strain Energy Dissipation Mechanisms in Carbon Nanotube Composites Fabricated by Additive Manufacturing
Frank Gardea, Daniel Cole, Bryan Glaz, Jaret Riddick

6. Mechanical Properties of 3-D LENS and PBF Printed Stainless Steel 316L Prototypes
Wei-Yang Lu, Nancy Yang, Joshua Yee, Kevin Connelly

7. Effect of Heat Treatment on Friction Stir Welded Dissimilar Titanium Alloys
Kapil Gangwar, M. Ramulu

8. Effect of Porosity on Thermal Performance of Plastic Injection Molds Based on Experimental and Numerically Derived Material Properties
Suchana A. Jahan, Tong Wu, Yi Zhang, Jing Zhang, Andres Tovar, Hazim El-Mounayri

9. ODS Coating Development Using DED Additive Manufacturing for High Temperature Turbine Components
Bruce S. Kang, Jaeyoon Kim, Eric Chia, Yang Li, Minking Chyu

10. Processing and Characterization of Ti64/AZ31 Multilayered Structure by Roll Bonding
Chin Shih Hsu, Qizhen Li

11. Vibration Characteristics of Unit Cell Structures Fabricated by Multi-Material Additive Manufacturing
Toshitake Tateno, Shogo Nishie

12. Defects, Process Parameters and Signatures for Online Monitoring and Control in Powder-Based Additive Manufacturing
Ehsan Malekipour, Hazim El-Mounayri

13. The Effect of the 3-D Printing Process on the Mechanical Properties of Materials
Bobby Tang Dan, Daniel Robert Khodos, Oliver Khairallah, Richi Ramlal, Yougashwar Budhoo

14. Tool Wear Mechanisms of Physical Vapor Deposition (PVD) TiAlN Coated Tools Under Vegetable Oil Based Lubrication
Salman Pervaiz, Wael Abdel Samad

Keywords: Engineering, Manufacturing, Machines, Tools, Continuum Mechanics and Mechanics of Materials, Characterization and Evaluation of Materials

Similar titles