Neelameggham, Neale R.
Magnesium Technology 2017
Part I. Magnesium Technology 2017: Keynote Session I
1. Multi-scale Investigation on Yield “Symmetry” and Reduced Strength Differential in an Mg–Y Alloy
Dalong Zhang, Lin Jiang, Xin Wang, M. Arul Kumar, Irene J. Beyerlein, Julie M. Schoenung, Mo Li, Subhash Mahajan, Enrique J. Lavernia
2. Targeting High Impact R&D for Automotive Magnesium Alloys
William J. Joost
3. Magnesium Development as a Lightweight Material—In Competition with Other Structural Materials
Alan A. Luo
4. The Continued Quest for Low-Temperature Formability in Mg Alloys: Historical Developments and Future Opportunities
Suveen N. Mathaudhu
Part II. Magnesium Technology 2017: Alloy Development
5. Using the Crystal Plasticity Approach to Parse the Effects of Alloying and Aging on the Mechanical Behavior of Wrought Mg Alloys
Sean R. Agnew, Jishnu J. Bhattacharyya, Fulin Wang, Patrick J. McQuade
6. Development of High-Strength High-Speed-Extrudable Mg–Al–Ca–Mn Alloy
T. Nakata, C. Xu, T. T. Sasaki, Y. Matsumoto, K. Shimizu, K. Hono, S. Kamado
7. Development of Ultra-High Strength and Ductile Mg–Gd–Y–Zn–Zr Alloys by Extrusion with Forced Air Cooling
C. Xu, T. Nakata, M. Y. Zheng, S. Kamado
8. Effect of Extrusion Ratio on Microstructure and Resulting Mechanical Properties of Mg Alloys with LPSO Phase
Klaudia Horváth, Daria Drozdenko, Gerardo Garcés, Kristián Máthis, Patrik Dobroň
9. Mechanically Alloyed Magnesium Based Nanostructured Alloy Powders for Biomedical Applications
P. Morcos, K. I. ElKhodary, H. G. Salem
10. Combined Effects of Grain Size Refinement and Dynamic Precipitation on Mechanical Properties of a New Magnesium Alloy
M. W. Vaughan, J. M. Seitz, R. Eifler, H. J. Maier, I. Karaman
11. Zn Segregation at Precipitate/Matrix Interface in Mg–Sn–Zn Alloys
Chaoqiang Liu, Houwen Chen, Jian-Feng Nie
12. Machinability Investigation in Micro-milling of Mg Based MMCs with Nano-Sized Particles
Xiangyu Teng, Dehong Huo, Wai Leong Eugene Wong, S. Sankaranarayanan, Manoj Gupta
Part III. Magnesium Technology 2017: Solidification and Processing I
13. Microsegregation in High Pressure Die Cast Mg Alloys
Tracy D. Berman, Mei Li, John E. Allison
14. Numerical Simulations of TRC Equipped with a Core
Jong-Jin Park
15. Growth of Al
G. Zeng, J. W. Xian, C. M. Gourlay
16. Influence of CaO Grain Refiner Addition on the Microstructure and Mechanical Properties of As-Cast Mg Alloys
Yahia Ali, Dong Qiu, Ming-Xing Zhang
17. Grain Refinement of Mg and Its Alloy by Inoculation of In Situ MgO Particles
Yun Wang, Guosheng Peng, Zhongyun Fan
18. Numerical Study of Magnesium Production by Pidgeon Process and Pre-prepared Pellets Silicothermic Process: Comparison of Heat Transfer
Daxue Fu, Ting-an Zhang, Zhi-he Dou, Lukui Guan, Ming Wen
19. On the Age Hardening Response of Aluminum Containing Magnesium Sheets with Zinc or Manganese (AZ- and AM Series Alloys)
Jan Bohlen, Ander Telleria Iparragirre, Gurutze Arruebarrena, Dietmar Letzig
20. Performance Evaluation of High-Pressure Die-Cast Magnesium Alloys
Mark Easton, Suming Zhu, Mark Gibson, Trevor Abbott, Hua Qian Ang, Xiaobo Chen, Nick Birbilis, Gary Savage
21. Simulation Study on Direct Desulfurization of Molten Iron by Magnesium Vapor
Yan Liu, Yongkun Yang, Dongxing Wang, Xiaolong Li, Ting-an Zhang
Part IV. Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue I
22. Twinning Super Dislocations to Help Understand Strength
Matthew R. Barnett
23. Transmutation of Basal Dislocations by 24. Ductility Enhancement in Mg Alloys by Anisotropy Engineering 25. Modeling the Effect of Alloying Elements in Magnesium on Deformation Twin Characteristics 26. Simulating Discrete Twin Evolution in Magnesium Using a Novel Crystal Plasticity Finite Element Model 27. The Effect of Part V. Magnesium Technology 2017: Solidification and Processing II 28. Optimization of a TRC-Tip for Producing of Mg-Sheet Material 29. Effects of Mn and Zn Solutes on Grain Refinement of Commercial Pure Magnesium 30. Experimental Investigation of Continuous Magnesium Production by Carbothermal Reduction 31. Precipitation Behavior of Mg–Al–Sn–Zn–(Na) Alloy 32. Study on the Direct Oxidation Thermal Decomposition of Magnesium Chloride by Product in the Sponge Titanium Production Process to Prepare Magnesium Oxide 33. Thermal Decomposition Kinetics of Dolomite in Pre-prepared Pellets for Magnesium Production 34. Thermal Stability of Cryomilled Mg Alloy Powder 35. Thermomechanical Processing of Thixomolded Alloys Part VI. Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue II 36. Dynamic Behavior of an AZ31 Alloy Under Varying Strain Rates and Stress Triaxialities 37. Enhancing the Tensile Response of Magnesium Through Simultaneous Addition of Aluminium and Alumina Nanoparticulates 38. Effect of Solutes Additions on the Microstructure and Mechanical Properties of Cast Mg–Al Based Alloys 39. Enhanced Mechanical Properties of Extruded Mg–9mass%Al–1mass%Zn–2mass%Ca Alloy 40. Influence of Strain Path Change on the Microstructure and Mechanical Properties of Duplex Mg–Li Alloy 41. Mechanical Properties and Deformation Mechanism of Mg–Y Alloy with Various Grain Sizes 42. Microstructure and Mechanical Properties of High Pressure Die Cast Mg–Al–Sn–Si Alloys 43. Microstructure and Mechanical Properties of an Extruded Mg-1.58Zn-0.52Gd Alloy 44. Modelling Magnesium Alloys for Improved Isotropic and Symmetric Yield Behaviour Part VII. Magnesium Technology 2017: Solidification and Processing III and Magnesium-Rare Earth Alloys I 45. Scaled-Up Fabrication of Thin-Walled ZK60 Tubing Using Shear Assisted Processing and Extrusion (ShAPE) 46. Biocompatible Magnesium Alloy ZNdK100—Adaptation of Extrusion Parameters to Tailor the Mechanical Properties to Different Implant Applications 47. Characterization of Semi-Closed Die-Forged ZK60Mg Alloy Extrusion 48. Optimization of Nitrogen Bubbling Conditions for Mg Extruded Alloy with Balanced Mechanical Properties 49. Effects of Gadolinium and Neodymium Addition on Young’s Modulus of Magnesium-Based Binary Alloys 50. Aging Behavior of Mg Alloys Containing Nd and Y 51. Variation of Rare Earth Elements in the Magnesium Alloy ME21 for the Sheet Production 52. Phase Stability and Formation in Mg–Gd–Zn Alloys—Key Data for ICME of Mg Alloys Part VIII. Magnesium Technology 2017: Corrosion 53. An Electrochemical Investigation of Mg–Ni Hydrogen Storage Alloys by Mechanical Alloying 54. Corrosion and Creep Resistance of Thixomolded 55. Corrosion Properties of Mg–6Al–0.3Mn–aSn–bZn Alloys 56. Corrosion of Magnesium–Aluminum (Mg–Al) Alloys—An Interplay Between Al Content and CO 57. Excimer Laser Processing of Al Containing Mg Alloys for Improved Corrosion Resistance 58. Effect of Al and Sn on Discharge Behavior of Mg Alloy as Anode for Mg-Air Battery 59. Utilization of a Partially Non-aqueous Electrolyte for the Spatial Mapping of Mg Corrosion Using a Model Mg–Al Electrode 60. Voltammetric Studies of Extruded Pure Magnesium in Different Electrolytes and Its Corrosion Morphology Part IX. Magnesium Technology 2017: Magnesium-Rare Earth Alloys II 61. Microstructure and Mechanical Properties of Mg–Zn–Gd Alloys After Rolling or Extrusion Processes 62. A Comparative Study on the Microstructure, Mechanical Properties, and Hot Deformation of Magnesium Alloys Containing Zinc, Calcium and Yttrium 63. Addition of Holmium and Erbium and Hot-Rolling Effects on the Microstructure and Mechanical Properties of Mg–Li Based Alloys 64. Bonding Environments in a Creep–Resistant Mg–RE–Zn Alloy 65. Microstructural and Numerical Investigation on the Shear Response of a Rare-Earth Magnesium Alloy Sheet 66. Solute Effect on Strength and Formability of Mg: A First-Principle Study 67. Understanding on the Role of Rare Earth Elements in Activation of 68. Stabilisation of Disordered 69. The Effect of Ca Addition on Microstructure and Mechanical Properties of Gravity Cast Mg–Zn–Y Alloy Part X. Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue III 70. Microstructure and Texture Evolution During Hot Deformation of Cast-Homogenized ZK60 Magnesium Alloy 71. Development of 72. Effect of Ca on the Microstructure, Texture and Mechanical Properties in Mg–Zn–Mn Based Alloy 73. Evaluation of In Vitro Fatigue Properties of Biodegradable Mg–0.3at.%Ca Alloy 74. Mechanical Properties and Fatigue Strength of Extruded Cobalt-Containing Magnetic Magnesium Alloys 75. Neutron Diffraction and Acoustic Emission Measurement During Loading and Unloading of Magnesium Aluminium Binary Alloys 76. Texture Weakening and Grain Refinement by High Speed Rolling and Annealing of an AZ31 Magnesium Alloy 77. The Relative Contributions of Deformation Modes to AZ31 Rolling Textures in Different Temperature Regimes 78. Effects of Texture and Triaxiality on the Plasticity of Magnesium Alloys Part XI. Magnesium Technology 2017: Poster Session 79. Processing and Properties of As-Cast Magnesium AM60-Based Composite Containing Alumina Nano Particles and Micron Fibres Part XII. In-Situ Methods for Unraveling Structure-Property Relationships in Light Metals: Imaging and Acoustic Emission 80. Overview of In Situ X-Ray Studies of Light Alloy Solidification in Microgravity 81. Morphological Transition of α-Mg Dendrites During Near-Isothermal Solidification of a Mg–Nd–Gd–Zn–Zr Casting Alloy 82. Real-Time Observation of AZ91 Solidification by Synchrotron Radiography 83. 3D Microstructural Evolution on Solidifying Mg–5Nd–5Zn Alloy Observed via In Situ Synchrotron Tomography 84. An Acoustic Emission Study of Deformation Behavior of Wrought Mg Alloys 85. Effect of Thermo-mechanical Treatment of Extruded Z1 Mg Alloy on Resulting Mechanical Properties 86. In Situ Investigation of Deformation Mechanisms in Mg–Zn–Y Magnesium Alloy with LPSO Phase by Diffraction Methods and Acoustic Emission Part XIII. In-Situ Methods for Unraveling Structure-Property Relationships in Light Metals: Diffraction and Other Novel Methods 87. Structural Evolution of Metals at High Temperature: Complementary Investigations with Neutron and Synchrotron Quantum Beams 88. Advanced Aluminum Alloy Development and In Situ Fitness-for-Service Testing for Automotive Lightweighting 89. In Situ X-Ray Synchrotron Profile Analysis During High Pressure Torsion of Ti 90. The Effect of Grain Refinement on Hot Tearing in AZ91D Magnesium Alloy 91. Formability of Magnesium Alloy AZ31B from Room Temperature to 125°C Under Biaxial Tension 92. In Situ Real-Time Monitoring of Aging Processes in an Aluminum Alloy by High-Precision Dilatometry 93. Effect of the Zn Content on the Compression Behaviour of Mg5Nd(Zn): An In Situ Synchrotron Radiation Diffraction Study Keywords: Materials Science, Metallic Materials, Characterization and Evaluation of Materials, Materials Engineering
S. Basu, E. Dogan, B. Kondori, I. Karaman, A. A. Benzerga
M. Arul Kumar, I. J. Beyerlein, R. A. Lebensohn, C. N. Tomé
Jiahao Cheng, Somnath Ghosh
D. Letzig, R. Hoppe, J. Isakovic, G. Kurz
Jian Gu, Yuanding Huang, Mingxing Zhang, Karl Ulrich Kainer, Norbert Hort
B. Chubukov, S. Rowe, A. Palumbo, I. Hischier, A. Weimer
Su Mi Jo, Yohan Go, Bong Sun You, Young Min Kim
Liping Niu, Ting-an Zhang, Guozhi Lv, Baojing Zhang
Lukui Guan, Ting-an Zhang, Zhi-he Dou, Daxue Fu
Dikai Guan, W. Mark Rainforth, Joanne Sharp, Junheng Gao
Raymond Decker, Stephen LeBeau, Tracy Berman, Tori Miller, J. Wayne Jones, Tresa Pollock, Nir Moskovich, Boris Bronfin
C. Kale, M. Rajagopalan, S. Turnage, B. Hornbuckle, K. Darling, S. N. Mathaudhu, K. N. Solanki
Wai Leong Eugene Wong, Manoj Gupta
Yahia Ali, Ming-Xing Zhang
Xinsheng Huang, Yasumasa Chino, Hironori Ueda, Masashi Inoue, Futoshi Kido, Toshiharu Matsumoto
Yun Zou, Yang Li, Hao Guo, Songsong Xu, Yu Zhao, Milin Zhang, Zhongwu Zhang
Ichiro Kawarada, Ruixiao Zheng, Akinobu Shibata, Hidetoshi Somekawa, Shigenobu Ogata, Nobuhiro Tsuji
Andrew D. Klarner, Weihua Sun, Jiashi Miao, Alan A. Luo
M. G. Jiang, J. C. Chen, H. Yan, C. Xu, T. Nakata, S. Kamado
A. E. Davis, J. D. Robson
Scott Whalen, Vineet Joshi, Nicole Overman, Dustin Caldwell, Curt Lavender, Tim Skszek
Rainer Eifler, Florian Schäfke, Hans Jürgen Maier, Christian Klose
S. M. H. Karparvarfard, S. K. Shaha, A. Hadadzadeh, S. B. Behravesh, H. Jahed, M. A. Wells, B. Williams
Wonseok Yang, Youngkyun Kim, Taeyang Kwak, Shae K. Kim, Hyunkyu Lim, Do Hyang Kim
Yuling Xu, Jie Li, Zhengye Zhong, Karl Kainer, Norbert Hort
Ellen L. S. Solomon, Timothy Chan, Andrew Chen, Benjamin Uttal-Veroff, Emmanuelle A. Marquis
G. Kurz, T. Petersen, J. Bohlen, D. Letzig
Rainer Schmid-Fetzer, Joachim Gröbner, Suming Zhu, Jian-Feng Nie, Mark A. Gibson
Gökçe Hapçı Ağaoğlu, Gökhan Orhan
R. Buzolin, H. Dieringa, C. Blawert, H. Frank, C. L. Mendis, A. Lohmüller, K. U. Kainer, N. Hort
Chang Dong Yim, Sang Kyu Woo, Nam Ryong Kim, Ha Sik Kim, Bong Sun You
M. Esmaily, J. E. Svensson, L. G. Johansson
M. A. Melia, M. L. Serron, D. C. Florian, J. P. Weiler, J. R. Scully, J. M. Fitz-Gerald
Sang Hyun Kim, Jun Ho Park, Hee San Kim, Jae Joong Kim, Oh Duck Kwon
L. G. Bland, R. F. Schaller, J. R. Scully
Petra Maier, Leon Gentzsch, Norbert Hort
R. S. Chen, M. G. Jiang, J. Luo, H. Yan, C. Xu, S. Kamado
K. P. Rao, K. Suresh, H. Dieringa, N. Hort
C. O. Muga, Y. Zhao, H. Guo, S. Xu, Y. Zou, Z. W. Zhang
Deep Choudhuri, S. G. Srinivasan, Mark A. Gibson, Rajarshi Banerjee
Michael J. Nemcko, Armin Abedini, Clifford Butcher, Peidong Wu, Michael J. Worswick
P. Garg, M. A. Bhatia, S. N. Mathaudhu, K. N. Solanki
Patrick L. J. Conway, Adam L. Shaw, Lori Bassman, Michael Ferry, Kevin J. Laws
Young-Gil Jung, Youngkyun Kim, Shae K. Kim, Hyun Kyu Lim, Do Hyang Kim
Amir Hadadzadeh, Sugrib Kumar Shaha, Mary A. Wells, Hamid Jahed, Bruce W. Williams
Byeong-Chan Suh, Taisuke Sasaki, Taiki Nakata, Shigeharu Kamado, Kazuhiro Hono
Naoko Ikeo, Akihito Taguma, Taichi Uemura, Toshiji Mukai
Christian Demminger, Christian Klose
Jan Čapek, Kristián Máthis
Jing Su, Stephen Yue
Matthew A. Steiner, Jishnu J. Bhattacharyya, Sean R. Agnew
Balaji Selvarajou, Shailendra P. Joshi, A. Amine Benzerga
Junxiang Zhou, Xuezhi Zhang, Li Fang, Henry Hu
D. J. Browne, F. García-Moreno, H. Nguyen-Thi, G. Zimmermann, F. Kargl, R. H. Mathiesen, A. Griesche, O. Minster
Daniele Casari, Wajira U. Mirihanage, Ken V. Falch, Inga G. Ringdalen, Jesper Friis, Rainer Schmid-Fetzer, Dongdong Zhao, Yanjun Li, Wim H. Sillekens, Ragnvald H. Mathiesen
G. Zeng, K. Nogita, S. Belyakov, J. W. Xian, S. D. McDonald, K. V. Yang, H. Yasuda, C. M. Gourlay
Tungky Subroto, Chamini L. Mendis, Francesco D’Elia, Gábor Szakács, Julie L. Fife, Norbert Hort, Karl Ulrich Kainer, Domonkos Tolnai
Patrik Dobroň, Daria Drozdenko, Sangbong Yi, Jan Bohlen
Daria Drozdenko, Jan Bohlen, Sangbong Yi, Patrik Dobroň
Kristián Máthis, Gerardo Garcés, Klaudia Horváth, Daria Drozdenko, Patrik Dobroň
Klaus-Dieter Liss
Dimitry Sediako, David Weiss, Ahmed Nabawy
Erhard Schafler, Michael B. Kerber, Florian Spieckermann, Torben Fischer, Roman Schuster, Cornelia Baeckmann
T. Davis, L. Bichler, F. D’Elia, N. Hort
Isaac Chelladurai, Andrew Orme, Mike P. Miles, David T. Fullwood, John E. Carsley, Raj K. Mishra, Irene J. Beyerlein, Marko Knezevic
Martin Luckabauer, Elisabeth Hengge, Gregor Klinser, Wolfgang Sprengel, Roland Würschum
Domonkos Tolnai, Tim Kärcher, Ricardo Buzolin, Tungky Subroto, Francesco D’Elia, Serge Gavras, Andreas Stark, Norbert Schell, Norbert Hort, Karl U. Kainer
- Editor
- Neelameggham, Neale R.
- Orlov, Dmytro
- Singh, Alok
- Solanki, Kiran N.
- Publisher
- Springer
- Publication year
- 2017
- Language
- en
- Edition
- 1
- Series
- The Minerals, Metals & Materials Series
- Page amount
- 22 pages
- Category
- Technology, Energy, Traffic
- Format
- Ebook
- eISBN (PDF)
- 9783319523927
- Printed ISBN
- 978-3-319-52391-0