8th International Symposium on High-Temperature Metallurgical Processing

Part I. Energy Efficient Clean Metallurgical Technology

1. Flash Ironmaking from Magnetite Concentrate in a Laboratory Reactor: Experimental and CFD Work
M. Elzohiery, D. Q. Fan, Y. Mohassab, H. Y. Sohn

2. Synthesis of Chromite for Subsequent Carburization by Methane-Hydrogen Gas Mixture
Vincent Canaguier, Ingeborg-Helene Svenum, Leiv Kolbeinsen

3. Effects of Hydrogen-Enriched Reduction on Metallurgical Properties of Iron-Bearing Burdens Under BF Operation with COG Injection
Hongtao Wang, Mansheng Chu, Chuanguang Bi, Zhenggen Liu, Wenbin Dai

4. Microwave-Intensified Reduction of Biochar-Containing Briquettes
Zhiwei Peng, Xiaolong Lin, Tiancheng Nie, Zhizhong Li, Yuanbo Zhang, Guanghui Li, Tao Jiang

5. Refractory Challenges in Lead Recycling Furnaces
D. Gregurek, K. Reinharter, V. Reiter, C. Wenzl, A. Spanring

6. Synthesis of Carbide Ceramics via Reduction of Adsorbed Anions on an Activated Carbon Matrix
Grant C. Wallace, Jerome P. Downey, Jannette Chorney, Alaina Mallard, David Hutchins

Part II. Simulation of High Temperature Process

7. A CFD Based Algorithm for Kinetics Analysis of the Reduction of Hematite Concentrate by H2+CO Mixtures in a Drop Tube Reactor
De-Qiu Fan, M. Elzohiery, Y. Mohassab, H. Y. Sohn

8. A Continuous Dynamic Process Model to Design a Carbon Profile Toward Yield Improvement
Mohammed A. Tayeb, Narottam Behera, Raja Mathu

9. Alloy Yield Prediction Model Based on the Data Analysis in EAF Steelmaking Process
Ling-zhi Yang, Yu-feng Guo, Feng Chen, Ze-Qiang Xie, Bai-hui Wang

10. Analysis of Jet Behavior and Surface Fluctuations in the Meniscus of Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling
Johne Jesus Mol Peixoto, Weslei Viana Gabriel, Ciro Azevedo Silva, Leticia Queiroz Ribeiro, Carlos Antonio Silva, Itavahn Alves Silva, Varadarajan Seshadri

11. CFD Study of Gas-Liquid Phase Interaction Inside a Submerged Lance Smelting Furnace for Copper Smelting
Guangwu Tang, Armin K. Silaen, Hongjie Yan, Zhixiang Cui, Zhi Wang, Haibin Wang, Kaile Tang, Ping Zhou, Chenn Q. Zhou

12. Debottlenecking High Temperature Metallurgical Plants Through Modeling and Simulation
K. Adham, T. Buchholz

13. Assessment of Slag Entrainment in a RH Degasser Through Physical Modelling Using Circulating Fluids of Different Densities/Oil Systems for Simulating Steel Melt/Slag
Johne Jesus Mol Peixoto, Natalia Barros Barony, Heric Henrique Souza e Silva, Weslei Viana Gabriel, Carlos Antonio Silva, Itavahn Alves Silva, Varadarajan Seshadri

Part III. Fundamental Research of Metallurgical Process

14. Investigate on the Phase Composition of Vanadium Slag with High CaO Content and Influence of P2O5 on Crystallization Kinetics of Spinels
Wang Zhou, Bing Xie, Zhao-Qun Ke, Jiang Diao, Wen-Feng Tan, Yu-Hao Liu, Hong-Yi Li, Zhang Tao

15. Thermal Analysis Kinetics of the Solid-State Reduction of Nickel Laterite Ores by Carbon
Xueming Lv, Xuewei Lv, Lunwei Wang, Jie Qiu

16. Evaluation of High Temperature Refractory Corrosion by Liquid Al2O3–Fe2O3–MgO–SiO2

Christoph Sagadin, Stefan Luidold, Christine Wenzl, Christoph Wagner

17. Thermodynamic Calculation on the Reactivity Between Slag and Ti-Stabilized Stainless Steel
Zhuo Chen, Kun-peng Xu, Sheng-ping He, Qian Wang

Part IV. Alloys and Materials Preparation

18. Development of a Novel, Low-Cost Titanium Extraction Process for Bulk or Powder Applications
James Cox, Chanaka De Alwis, Benjamin Kohler, Mike Lewis, Matthew Call, Julia Kluck, Amelinda Olson, Marc Snyderman

19. Evolution of Non-metallic Inclusions in Solid Fe–Al–Ti–N Alloy During Heating
Hiroyuki Matsuura, Wonjin Choi, Gen Kamimura

20. Preparation of Low-Carbon Ti2O3 by Carbonthermal Reduction of the Mixture of Titanium Dioxide and Activated Carbon Under Vacuum Condition
Kejia Liu, Yaowu Wang, Yuezhong Di, Jianping Peng, Xinzhong Deng, Naixiang Feng, Yi Zhang

21. Pyrometallurgical Studies for Manganese Extraction Using Turkish Ore Reserves
Ender Keskinkilic

22. Trace Elements Behavior During the Oxidation of Liquid SiMn Alloy
Yan Ma, Ida Kero, Sarel Johannes Francois Gates, Gabriella Tranell

23. Effect of Microalloy Elements V and Mg on Organization at High Heat Input Welding Shipbuilding Structure Steel
Wang Yan, Han Yihua, Zhu Liguang, Zhang Qingjun, Wang Shuoming, Zhang Caijun

Part V. Extraction and Recovery of Metals

24. Effect of Carbon Reductant on the Formation of Copper Doped Titanium Oxycarbonitride by Carbothermal Reduction and Nitridation
Yong Jing Hui, Noor Izah Shoparwe, Sheikh Abdul Rezan, Norlia Baharun, Srimala Sreekantan, M. N. Ahmad Fauzi

25. Cohering Behavior of Iron Ore Pellet Powder in Kiln by a Novel Natural Stacking Method
Xiaoliang Liu, Yongbin Yang, Yan Zhang, Qian Li, Bin Xu, Tao Jiang

26. Direct-to-Blister Copper Smelting with the ISASMELT™ Process
Paul Voigt, Alistair Burrows, Michael Somerville, Chunlin Chen

27. Improving Separation of Cu–Fe from Copper Slag by Modification of the Molten Slag
Zheng-qi Guo, De-qing Zhu, Jian Pan, Feng Zhang

28. Phase Transformation of High Calcium Type Tin-, Iron-Bearing Tailings During Magnetizing Roasting Process
Zijian Su, Yuanbo Zhang, Yingming Chen, Bingbing Liu, Guanghui Li, Tao Jiang

29. Sensitivity of Contactless Ultrasound Processing to Variations of the Free Surface of the Melt with Induction Heating
G. Djambazov, V. Bojarevics, D. Shevchenko, D. Burnard, W. Griffiths, K. A. Pericleous

30. Extraction of Zinc from Willemite by Sodium Salt Roasting and Ammonia-Leaching Process
Xudong Liu, Ganghua Fu, Yufeng Guo, Tao Jiang, Wei Chen, Yujia Tan

Part VI. Ironmaking and Steelmaking

31. Influence of Ruhrstahl Heraeus Refining Process on Aluminum Consumption in Interstitial-Free Steel Smelting Process
Siyuan Zhang, Yanping Bao, Chaojie Zhang, Lu Lin, Wei Xiao

32. Formation Mechanisms of Inclusions in Spring Steels
Sha Lv, Zongze Huang, Zan Yao, Xiaodong Ma, Geoff Wang, Zhouhua Jiang, Jin Zou, Baojun Zhao

33. Investigation on Coal Combustion Behaviors in the Oxygen Blast Furnace
Zhenfeng Zhou, Yuanyuan Zhang, Guang Wang, Jingsong Wang, Qingguo Xue

34. Inclusion Control with Ca Treatment to Improve Castability of Low Carbon Aluminum-Killed Steel
S. Sun, S. Waterfall, N. Strobl, D. Liao, D. Holdridge

35. High Temperature Mineralization Mechanism of Granules During Iron Ore Sintering Process
Wei Lv, Xiaohui Fan, Min Gan, Xuling Chen, Zhiyun Ji, Yang Zhou, Guojing Wang, Qiang Li

36. Reduction Behaviors of Sinter Made from Magnetite Concentrates in Reducing Process Simulated COREX Shaft Furnace
Benjing Shi, Deqing Zhu, Jian Pan, Yuxiao Xue

Part VII. Treatment and Recycling of Slag/Wastes

37. Introduction of Matte Droplets in Copper Smelting Slag
Xiangfeng Cheng, Zhixiang Cui, Leonel Contreras, Mao Chen, Anh Nguyen, Baojun Zhao

38. Dissolution Behavior of Fe from Glassy Oxides Phase in Steelmaking Slag
Shohei Koizumi, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

39. Penetration Depth of Microwave in Tire Rubber
Yuzhe Zhang, Jiann-Yang Hwang, Zhiwei Peng, Matthew Andriese, Bowen Li, Xiaodi Huang, Xinli Wang, Xin Yan

40. Effect of TiO2 on Thermophysical Properties and Structure of P-Bearing Steelmaking Slags
Zhanjun Wang, Zuotai Zhang, Mei Zhang, Min Guo

41. Analysis for Optimum Conditions for Recovery of Valuable Metals from E-waste Through Black Copper Smelting
M. A. H. Shuva, M. A. Rhamdhani, G. A. Brooks, S. Masood, M. A. Reuter, M. Firdaus

42. Precipitation Behavior of MxTi3-xO5 in the Titanium-Bearing Electric Furnace Slag
Fuqiang Zheng, Xiaoming Qu, Guanzhou Qiu, Yufeng Guo, Tao Jiang

Part VIII. Utilization of Complex Ores

43. Evaluation of Molybdenum Concentrates
Kagan Benzeşik, Seref Sonmez, Onuralp Yücel

44. Intensification of Gold Leaching from a Multi-refractory Gold Concentrate by the Two-Stage Roasting—Alkaline Sulfide Washing—Cyanidation Process
Qian Li, Yan Zhang, Xishan Li, Bin Xu, Yongbin Yang, Tao Jiang, Hongwei Li

45. Recovery of Cobalt from Copper Converter Slag by Reduction-Sulfurization Smelting at High Temperature
Shi Sun, Hongxu Li, Jiaqi Fan, Chao Li, Qi Liu

46. Roasting of Celestite in Laboratory Scale Rotary Furnace
Selim Ertürk, Raşit Sezer, İbrahim Göksel Hizli, Ayşegül Bilen, Cüneyt Arslan

47. The Experimental Study of CaCO3 in the Vanadium Extraction Process
Shu-Chao Wang, Yu Wang, Wei-Tong Du, Peng-cheng Li

48. The Extraction of Zinc from Zinc Ferrite by Calcified-Roasting and Ammonia-Leaching Process
Zeqiang Xie, Yufeng Guo, Tao Jiang, Feng Chen, Lingzhi Yang

Part IX. Poster I

49. A New Method to Detect the High Temperature Distribution in the Ironmaking and Steelmaking Industry
Dongdong Zhou, Shusen Cheng

50. A Study for Reconstructing the Three-Dimensional Temperature Field of a Blast Furnace Raceway Based on Monte Carlo Method
Yan Li, Shusen Cheng, Ruixuan Zhang

51. Behaviour of Silicon in Nickel Laterite by Carbothermic Reduction in Vacuum
Lei Shi, Tao Qu, Dachun Liu, Yang Tian, Bin Yang, Yongnian Dai

52. Effect of CaO Addition on the Behavior of Vanadium and Phosphorus During Oxidation and Leaching Process
Tao Zhang, Zhou Wang, Dong-Wei Li, Diao Jiang

53. Effect of Inner Shape on Blast Furnace Performance for Iron Making
Xun Zhang, Huiqing Tang

54. Effect of Lance Configurations on Coal Flow and Combustion Characteristics
Hailong Huo, Zhenfeng Zhou, Jingsong Wang, Qingguo Xue, Yuanyuan Zhang, Yingli Liu

55. Effect of Silicon on Removal of Phosphorus from High Phosphorus Si–Mn Alloy by CaO-Based Slag
Zhiqiang Zhou, Zizong Zhu, Yuchuan Ding, Shengnan Zhou

56. Effect of Super Gravity on the Solidification Structure and C Segregation of High-Carbon Steel
Yuhou Yang, Bo Song, Gaoyang Song, Zeyun Cai

57. High Temperature Distribution Measurement of the Blast Furnace Raceway Through Imaging Techniques and Optimization Algorithms
Ruixuan Zhang, Shusen Cheng, Yan Li

58. Kinetics and Reduction Behavior of Self-reducing Briquettes Containing Blast Furnace Dust
Shengli Wu, Feng Chang, Jianliang Zhang, Hua Lu

59. Model Analysis of the Phenomena of Pulverized Coal Injection in Blast Furnace
Tian Chen, Shusen Cheng, Wenxuan Xu

60. Sintering Performance of Blends Containing High Proportion of Limonite
Feng Zhang, De-qing Zhu, Jian Pan

61. Thermodynamics Study on Phosphorus Distribution Between 2CaO·SiO2-3CaO·P2O5 Solid Solution and Liquid Slag
Chao Jiang, Ming-Mei Zhu, Rui-Rui Zhao, Zhang-Guang Gao

62. Two-Step Copper Smelting Process at Dongying Fangyuan
Zhi Wang, Zhixiang Cui, Chuanbing Wei, Haibin Wang

Part X. Poster II

63. Comparison of the Ringing Characteristics Between Acid and Alkaline Iron Ore Pellets Powder in Kiln
Xin Min, Yongbin Yang, Qian Li, Bin Xu, Tao Jiang, Xiaoliang Liu, Yan Zhang

64. Comprehensive Utilization of Ludwigite Iron Concentrate by Gas-based Direct Reduction
Luxing Feng, Jun Deng, Xun Xue, Zhicheng Cao, Jingkun Tang, Daohong Wu

65. Decarburization of Spent Petrochemical Catalysts via Microwave Oxidation Roasting
Libo Zhang, Peng Liu, Haigang Dong, Bingguo Liu, Jinhui Peng

66. Effect of FeO Content in Laterite Nickel Slag on the Corrosion Behaviour of Refractory Materials
Shuming Huang, Jilai Xue, Zengie Wang

67. Effects of Blowing Conditions on the Dispersion States of Materials Charged into Bottom Blown Oxygen Smelting Furnace
Dongxing Wang, Yan Liu, Zhang Ting-an, Xiaolong Li

68. Effects of Pre-oxidation and Additive on Carbothermic Reduction of Ilmenite Concentrate
Wei Lv, Yingyi Zhang, Gangqiang Fan, Kai Tang, Xuewei Lv

69. Influence of Converter Slag on Decomposition Behavior of Limestone During BOF Steelmaking Process
Hua Lu, Chenxiao Li, Wenwen Mao, Hong Li

70. Influence of Hot Charge on Blast Furance Performance for Iron Making
Huiqing Tang, Xun Zhang, Lifeng Zhang, Zhilong Zhao

71. Investigation and Application of Evaluation System of Stock Surface Gas Flow Distribution in Blast Furnace
Wenxuan Xu, Shusen Cheng, Guolei Zhao

72. Investigation of the Carbothermic Reduction of Chromium-Containing Vanadium Extraction Residue
Pan Gu, Jiang Diao, Wen-feng Tan, Bing Xie, Wang Zhou, Zhen Zhang

73. Molecular Dynamics Study of the Structural Properties with Varying B2O3/SiO2 Ratios in the System CaO–SiO2–B2O3

Xiao-Ping Liang, Wei-Tong Du, Yu Wang

74. One-Step Extraction of Lead from Spent Lead-Acid Battery Paste via Reductive Sulfur-Fixing Smelting: Thermodynamic Analysis
Yun Li, Chaobo Tang, Yongming Chen, Shenghai Yang, Lulu Guo, Jing He, Motang Tang

75. Removal of Cd(II) Ion from Aqueous Solution by Adsorption on Wasted Low Grade Phosphorus-Containing Iron Ore
Xiaoli Yuan, Wentang Xia, Juan An, Xiaoyan Xiang, Xuejiao Zhou, Jianguo Yin, Wenqiang Yang

76. Research on the Flow Behavior of Molten Slag Through Pore
Yingli Liu, Qingguo Xue, Jingsong Wang, Guang Wang

77. Study on the Influence of Materials on Heat Transfer Characteristics of Blast Furnace Cooling Staves
Feng-guang Li, Ju Zhang, Rui Guo

Keywords: Materials Science, Characterization and Evaluation of Materials, Metallic Materials, Materials Engineering