Haldar, Arunansu
Microstructure and Texture in Steels
Part I. Introduction
1. Transformation Textures Associated with Steel Processing
John J. Jonas
2. Mathematics of Crystallographic Texture in Martensitic and Related Transformations
Harshad Kumar Dharamshi Hansraj Bhadeshia, S. Kundu, H. Abreu
3. Structure and Strength of IF Steel After Large Strain Deformation
Niels Hansen, Xiaoxu Huang, Naoya Kamikawa
4. The Coming of Grain Boundary Engineering in the 21st Century
Tadao Watanabe, Sadahiro Tsurekawa, Xiang Zhao, Liang Zuo
Part II. Control of Texture and Microstructure in Steels
5. Texture Development in Low Carbon Sheet Steels for Automotive Application
Jun-Yun Kang, Dong-Ik Kim, Hu-Chul Lee
6. Texture and Microstructure Evolution at the Metal-Vapour Interface During Transformation Annealing in a Mn and Al Alloyed Ultra Low Carbon Steel
Leo A. I. Kestens, Jai Gautam, Roumen Petrov
7. Precipitation Behavior and Textural Evolution in Interstitial Free High Strength (IFHS) Steels
Ranjit Kumar Ray, P. Ghosh
8. Texture, Microstructure and Properties of Coatings on a few Industrially Produced Galvanized and Galvannealed Interstitial Free Steels
Debashish Bhattacharjee, A. Chakraborty, Ranjit Kumar Ray, R. Pais
9. Effects of Microalloying in Multi Phase Steels for Car Body Manufacture
Wolfgang Bleck, Kriangyut Phiu-on
10. State-of-the-Science of High Manganese TWIP Steels for Automotive Applications
B. C. Cooman, L. Chen, Han Soo Kim, Y. Estrin, S. K. Kim, H. Voswinckel
11. Third Generation of AHSS: Microstructure Design Concepts
David K. Matlock, John G. Speer
Part III. Modeling
12. Crystal Plasticity Based Modelling of Deformation Textures
Paul Houtte
13. Simulation of Persistence Characteristics of Textures During Plastic Deformation
László S. Tóth
14. DXRD and Its Applications Leading to New Modelling
Dorte Juul Jensen
15. 3D Image-Based Viscoplastic Response with Crystal Plasticity
Anthony D. Rollett, Sukbin Lee, Ricardo A. Lebensohn
Part IV. Specialized Characterization Techniques
16. Diffraction Techniques in Steel Research: An Overview
Stefan Melzer, Jaap Moerman
17. Non-Contact Non-Destructive Measurement of Texture Using an Electro-Magnetic Acoustic Transducer (EMAT) Sensor
Claire L. Davis
18. Texture Transition in Steel ST37K, in situ Measurement at High Temperatures Using High-Energy X-rays
Heinz-Guenter Brokmeier, S. B. Yi, J. Homeyer
Part V. Texture and Microstructure Development During Special Processes and Materials
19. Ultra-fine Grain Materials by Severe Plastic Deformation: Application to Steels
Satyam Suwas, Ayan Bhowmik, Somjeet Biswas
20. Development of Texture from the HAZ to Weldmetal Across the Fusion Boundary
Martin Strangwood, Claire L. Davis
21. Evolution of Recrystallization Texture in AISI300 Series Austenitic Stainless Steels After Cold Rolling to Large Strain
Sandip Ghosh Chowdhury, P. Sahu, B. Mahato, P. K. De
22. Deformation and Recrystallization Textures in Iron Aluminides
Werner Skrotzki, R. Tamm, K. Kegler, C.-G. Oertel
23. Effect of Nanocrystallization on the Phase Stability of Al-Cu-Ti and Al-Cu-Nb Metallic Systems
S. Bera, Indranil Manna
Part VI. Contributory Papers
24. Investigation of Microstructure Development During α-γ-α Phase Transformation in Steel by Using High Temperature in situ EBSD
I. Lischewski, D. M. Kirch, A. Ziemons, G. Gottstein
25. A New Flow Function to Model Texture Evolution in Symmetric and Asymmetric Rolling
Benoît Beausir, László S. Tóth
26. Microstructure and Texture Evolution During the Accumulative Roll Bonding of Pure Ni
P. P. Bhattacharjee, D. Terada, N. Tsuji
27. Microstructure of the Rust Formed on Si-Al Bearing Ultrafine-Grained Weathering Steel
V. Raman, T. Nishimura
28. Microstructure Evolution in Three FCC Materials During Limited Dome Height Test
S. Mishra, P. Pant, K. Narasimhan, I. Samajdar
29. The Facet Method for the Description of Yield Loci of Textured Materials
Sampath Kumar Yerra, Albert Bael, Paul Houtte
30. The Hall-Petch Relationship in Interstitial-Free Steel Processed by Equal Channel Angular Extrusion
Azdiar A. Gazder, Christopher H. J. Davies, Elena V. Pereloma
31. Evolution of Crystallographic Texture During Equal Channel Angular Extrusion (ECAE) of (α+β) Brass
Satyaveer Singh D., Ayan Bhowmik, Somjeet Biswas, Satyam Suwas, K. Chattopadhyay
32. Grain Growth in ECAE Processed Pure Magnesium
Somjeet Biswas, Satyaveer Singh D., Satyam Suwas
33. Solidification Microstructure and Texture in Grain-Refined Titanium Alloys
Segolene Waziers, Shibayan Roy, Satyam Suwas, S. Tamirisakandala, R. Srinivasan, D. B. Miracle
34. Effect of Intercritical Heat Treatment on the Abrasive Wear Behaviour of Plain Carbon Dual Phase Steel
M. K. Manoj, V. Pancholi, S. K. Nath
Keywords: Material Science, Metallic Materials, Building Materials
- Author(s)
- Haldar, Arunansu
- Suwas, Satyam
- Bhattacharjee, Debashish
- Publisher
- Springer
- Publication year
- 2009
- Language
- en
- Edition
- 1
- Page amount
- 19 pages
- Category
- Technology, Energy, Traffic
- Format
- Ebook
- eISBN (PDF)
- 9781848824546